GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

ET time's good or bad?

Old Mar 13, 2006 | 05:21 AM
  #1  
Thread Starter
On The Tree
 
Joined: Jun 2004
Posts: 181
Likes: 0
From: Texas
Default ET time's good or bad?

My brother has an 05 chevy 5.3 RCSB which is running 14.0, His current mods are G80+3.90 gears, Pacesetter LT's + dual 2.5" dynomax bullets with magnaflow X pipe, Mac CAI, super servo, TCI 3K stall, HP tuned. Don't ya'll think those times should be a little lower?
Reply
Old Mar 13, 2006 | 06:40 AM
  #2  
Sport Side's Avatar
TECH Veteran
iTrader: (6)
 
Joined: Nov 2003
Posts: 4,397
Likes: 0
From: Tallahassee, FL
Default

Originally Posted by PeewterSS4.8
My brother has an 05 chevy 5.3 RCSB which is running 14.0, His current mods are G80+3.90 gears, Pacesetter LT's + dual 2.5" dynomax bullets with magnaflow X pipe, Mac CAI, super servo, TCI 3K stall, HP tuned. Don't ya'll think those times should be a little lower?
Yes but, that completely depends on how he is coming out of the hole. If he's still clipping 2.0-2.2 60', then a 14.0 is expected.
If this is the scenario, tell him to throw on some ET streets and he'll definetly be in the 13s.

What is his MPH thru the traps?
Reply
Old Mar 13, 2006 | 06:42 AM
  #3  
ZR1 DREAMING's Avatar
TECH Senior Member
iTrader: (28)
 
Joined: Aug 2005
Posts: 8,277
Likes: 1
From: Ham Lake, MN
Default

, what's his 60' and mph?
Reply
Old Mar 13, 2006 | 08:14 AM
  #4  
rgvsierra's Avatar
TECH Fanatic
iTrader: (7)
 
Joined: Jul 2002
Posts: 1,482
Likes: 0
From: RGV, Texas
Default

some 05's havent come out to good from what i've seen, but yea what was his 60ft??

oh yea, so how about that Lightning..
Reply
Old Mar 13, 2006 | 03:44 PM
  #5  
Thread Starter
On The Tree
 
Joined: Jun 2004
Posts: 181
Likes: 0
From: Texas
Default

Originally Posted by Sport Side
Yes but, that completely depends on how he is coming out of the hole. If he's still clipping 2.0-2.2 60', then a 14.0 is expected.
If this is the scenario, tell him to throw on some ET streets and he'll definetly be in the 13s.

What is his MPH thru the traps?
Im the one who runs the truck, my 60 ft is 1.891 and my MPH is 95.607
BTW we had the et streets on there 26"x10.5"
Reply
Old Mar 13, 2006 | 03:56 PM
  #6  
SSlow 4.8's Avatar
TECH Junkie
iTrader: (4)
 
Joined: Mar 2005
Posts: 3,394
Likes: 1
From: Flowery Branch, GA
Default

looks like it might be in fine tuning or weather conditions... 60' looks good that mph is a little low tho to be pushing 13's just yet... what rpm are you leaving at?
Reply
Old Mar 13, 2006 | 04:08 PM
  #7  
Thread Starter
On The Tree
 
Joined: Jun 2004
Posts: 181
Likes: 0
From: Texas
Default

Originally Posted by rgvsierra
some 05's havent come out to good from what i've seen, but yea what was his 60ft??

oh yea, so how about that Lightning..
Hey whats up Daniel, yea he wanted to race ya'll again with the tune he raced you first here in roma. when he raced friday he didn't have no tune, and you know how it runs with the tune
Reply
Old Mar 13, 2006 | 04:17 PM
  #8  
Thread Starter
On The Tree
 
Joined: Jun 2004
Posts: 181
Likes: 0
From: Texas
Default

Originally Posted by SSlow 4.8
looks like it might be in fine tuning or weather conditions... 60' looks good that mph is a little low tho to be pushing 13's just yet... what rpm are you leaving at?
I tried 1500 rpms and 2900rpms and it did the same times.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dantheman1540
Foreign Performance Discussion
1
Jul 29, 2015 04:45 PM
silver-mod-o
THE TRUCK STOP
9
Jul 27, 2015 05:24 PM
GMCtrk
FORCED INDUCTION
67
Jul 17, 2015 06:39 PM
GMCtrk
THE TRUCK STOP
6
Jul 9, 2015 08:26 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:58 AM.