whats the best way to get the pin out of the pcm harness? Trying to remove the efans. I tried pulling, pushing a pin from the other side to back it out, maybe I am not trying hard enough.

any info would help, thanks

 

The harness should have a clip holding the pin in. Pry that back and the pin should pull right out.

 

I would just truck the pig tail away in the harness.....I dont think they will find it.

 

what dealer are you taking it too?

 

There is a tab on the side of the connector that goes toward the pcm. Take an icepick and pull that out a little and then the wire should be freed up.