Dyno'd the Hoe, Carnage pics....
Jun 21, 2007 | 09:43 PM
#12
Thread Starter
Destroyer of Transmissions
iTrader: (28)
Joined: Feb 2005
Posts: 4,962
Likes: 1
From: Orlando, FL
Originally Posted by TurboGibbs
Sorry man. I have tested my new Dynotech aluminum shaft to 7000rpm on the dyno with 2 pulls and performed flawless. I highly recommend. I think mine is 62.5" eye to eye.
The vid is 124MB so it looks like Photobucket will be taking its sweeet time with it. I will see if I can get the pics up now.
Jun 21, 2007 | 09:53 PM
#14
Thread Starter
Destroyer of Transmissions
iTrader: (28)
Joined: Feb 2005
Posts: 4,962
Likes: 1
From: Orlando, FL
This is John Weeks' fault if anbody asks. J/K John
Got a ride home from Brad a XXX Motorsports (The Pensacola dyno shop I use). He drove the Hoe and me about an hour home for nothing more than gas money. Big props to Brad and XXX Motorsports for taking care of the customer
The dyno run vid has been running for 10 minutes and is still at 0%
The aftermathe vid is at 25%
Grab a beer, it may be awhile
Oh and if it matters I made 472hp @ 5,500'ish rpm and 501tq @ 2,500rpm
Got a ride home from Brad a XXX Motorsports (The Pensacola dyno shop I use). He drove the Hoe and me about an hour home for nothing more than gas money. Big props to Brad and XXX Motorsports for taking care of the customer
The dyno run vid has been running for 10 minutes and is still at 0%
The aftermathe vid is at 25%
Grab a beer, it may be awhile
Oh and if it matters I made 472hp @ 5,500'ish rpm and 501tq @ 2,500rpm
