speed01rcr

that's something else, I could have used plastic, but anything I had durable was lie a 1/16" thick, and would have bulged my moulding
&*#&*O()*O&UIGB mn. crap

99Silver6.0

iTrader: (1)

I might still have the leftover chunk of panel. I used it for a couple other projects. Ill go look. If I have some i can send it.

Jethro_3

iTrader: (1)

Called socaldiesel and he siad he has a plastic prototype he possibly could send me....

He was 2 weeks away from making the aluminum style pods and the price is somewhere between $125 and $200. Tilted 7* up and 15* towards driver. Sounds good, now just waiting for pictures......

Jarod, let me know if you find some extra, I could make it worth your while. Thanks.

speed01rcr

For next to nothing except the price of the little wedge auto meter sells, you can make one. All you really need is a flat piece of sheet alluminum to cut out. .050" thick maybe, or around that ball park. Take the pod out and trace out the piece to cut with a band saw. If he doesen't give you one, I wouldn't waste $200 on it. If you make it yourself you'll see how you would have been bent over...

budhayes3

iTrader: (19)

You can get sheets of black ABS plastic at certain mobile electronics shops...I've seen guys at BestBuy use it...

found some on ebay: http://cgi.ebay.com/ebaymotors/NEW-A...18495998QQrdZ1

99Silver6.0

iTrader: (1)

There is that too. I just scrounged around here till I found something with nice textrue and thick.