anyone know what this is?
10-29-2009, 08:56 PM
#13
Staging Lane
iTrader: (1)
Join Date: Feb 2009
Location: Grapevine
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
dont let it hang down if you tow a boat, when you back in the lake it will suck up water.. temperature change from the trans getting wet creates suction. (happened to a friends diff)
10-29-2009, 10:13 PM
#14
Launching!
iTrader: (14)
Join Date: Jul 2008
Location: Douglas Georgia
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
I may be wrong but it looks like it is not hooked to the top of the transmission either. see the t on the hose. It slides onto a little hose top center of the trans.
10-29-2009, 10:31 PM
#16
KickinAssAndTakinNames
Thread Starter
yeah your right. i remember during the tranny swap i couldnt find the little rubber hose that went from the T to the top of the transmission, and saying to hell with it. is the other end of that hose connected to anything? if not i think im going to ditch the whole thing.
10-31-2009, 09:07 AM
#18
Perfect pic DrX...
Mount that vent where it belongs, GM has enough problems with their different vents filling with junk when mounted in the factory position, I'm sure that it will quickly fill with junk if you just leave it hanging. Or you can do it the ghetto way and just zip tie it somewhere up high...
Mount that vent where it belongs, GM has enough problems with their different vents filling with junk when mounted in the factory position, I'm sure that it will quickly fill with junk if you just leave it hanging. Or you can do it the ghetto way and just zip tie it somewhere up high...
10-31-2009, 09:36 AM
#19
TECH Regular
iTrader: (8)
Join Date: Sep 2006
Location: RGV, TEXAS
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
I have mine on the passenger floor. Couldn't figure out where the hell to route it to. Buddy told me it was just a breather hose so I took it out. Guess now I can re-install it.
