WTB: Flexplate and spacer
 

Looking for a flexplate for a 4L80E Transmission and the crank spacer.


Thanks :judge:

Got a spacer......

Still need the Flexplate

Thanks guys

TTT for tonight

If you got a spacer, you use your flexplate. The 6.0 / 4L80E flexplate has the spacer made into (ie. welded) it. The 6.0 flexplate that comes on the aluminum headed 6.0 2001 and up is all that is needed. You don't need a spacer with it.

The 6.0 didn't come with a flexplate.

But, I do thank you for the info on the Transmission, Got it yesterday!!!!! Sweet deal and 10 miles on it. Thanks


And a BUMP for a flexplate!

Cool deal on the trans! What motor are you putting the trans behind? What I'm saying is, the 6.0 flexplate has the spacer built into it, so you don't need it.

Steve if you get in a bind I have one I'm sure you can use until you can get another one.

I'm using a 6.0 and 4L80, and I have a spacer, so I can just use my 5.3 flexplate????

If that is true then I am all set. but I thought the flexplate depended on the trans?

Can someone verify this?

The 80 flexplate and convertor I have have six bolt holes. Do you only use three wit the 5.3 flexplate?