I should start off with a question. I'm using a truck harness and have a Fast 90 intake with Corvette fuel rails. Will truck injectors fit with this intake/rail?

If so - I am looking for a set of 42# injectors with the Mini Delphi connectors. Let me know if you have any!


Thanks,
Zach

 

I have a set let me verify the flow rate when i get home should be what ur looking for...

 

Nevermind...truck injectors won't fit with my rails.

 

The ones I have are short injectors and I have injector extenders if you need them

 

Hmm...short injectors=compatible with LS1 car type rails?

 

I have a set of green top 42lb injectors that were include in my procharger kit for my vette. They have the ls1 style plug which I am pretty sure is different than the truck style plug. Most likely would need a adapter to make them work.

 

I believe truck injectors are shorter than LS1. LS1 injectors are EV1 plug, and truck injectors are Multec 2.

I just went through a similar but opposite process as you. I ended up getting some pigtail plugs from Racetronix, and will need to cut off my truck harness plugs and solder and heat shrink these on.

 

Yea - I still have to convert the harness for stand alone use...so I'll probably just put EV6 plugs on it when I do that - that way I'm set up in case I go to an LSXRT intake.

 

well EV6 plugs won't work with LS1 type injectors, just so you know, unless you then get an adapter harness to go from EV6 male to EV1 female. ...or just change your search for injectors to newer EV6 type.