I have new:
valley gasket GM#12558178

Used with 14k miles:
Flowtech Induction 7.40 pushrods 5/16 x .083 SOLD
LS7 Lifters SOLD
Melling High Volume oil pump SOLD
Stock timing chain/sprockets 2k miles SOLD
AFR 225 head Springs 14k SOLD

Sell all for $175[/B]

LS6 Crank/Rods 19k miles
$150

Stock chevy truck TC...$75..(was with 4L60e)
Pitt

 

will your parts fit a 2002 LQ9 engine? text 5202474159

 

What lift are the springs rated at? Just wanted to know why these where removed from engine, I'm a little Leary of installing a used oil pump.

 

They are on the same block I think...isn't a LQ9 a 6.0 block ? My block is a 6.0 Aluminum

The heads are bpx afr 225 62 cc heads, and I think the spring rate was 660 max lift. The pump is Melling high pressure. I rebuilt my motor with 14k mi.
I wanted all new stuff when I built. These are the left over parts.

Just selling the stuff cheap as it will go in the attic and never be used otherwise.

 

You have a cable throttle body?

 

I have the stock one from the old 5.3 motor. Also have a Drive-by-wire 90 mm from a 2003 LS6