Turn-key 355SBC Motor and extras for sale - Check inside!
#1
Turn-key 355SBC Motor and extras for sale - Check inside!
Hey guys, I have a complete 355 SBC in my 86 monte and im looking to swap it out and put a LSx motor in. Still in car so if you would want to swing by and hear it or get a ride (weather permitting), that would work. This is a turn-key package.
Absolutely nothing wrong with the motor..built by a professional builder (Schwanke Engines, sponsor on here) and maintained by a mechanic (me). Any doubts in the condition or sincerity of my words, feel free to contact me. PM me for contact info
Anyways, basic specs on the motor are as follows
- Speed pro flat top pistons and rings
- Eagle connecting rods and ARP rod bolts
- Z20 isky solid cam and lifters
- Kevco 8 qt oil pan (built so theres no oil starvation under heavy acceleration)
- Complete 6AL MSD ignition system (1 month of use) Will sell separate
- PRO heads… intake: 2.02 exhaust 1.6
- Crower roller rockers
- Speed pro hardened push rods
- Moroso high flow/volume oil pump
- Cloyes hex adjust chain and gears
- Edelbrock air-gap intake (1 month of use)
- Edelbrock 600cfm Performer carb (1 month of use)
- Hooker headers flow matched for the set-up
- Comes with the 140amp alternator upgrade, water pump, power steering, and all pulleys. Like I said…Complete motor
PM me if you want pictures of anything
Im asking $1950 w/o full MSD and $2250 with it. I am open to any reasonable offer.
Also have more parts if interested let me know
- Holley Street dominator intake - $80
- TH350 tranny w/ 2800-3200 hole shot b&m stall and shift kit (2 months of use) - $500
- Holly 750 Double Pumper (2 months of use, Extra power valves and jets) $280
- Accel distributor - $60
- HEI distributor w/ msd upgrade (internals) - $80
Probably more that I forgot to list so if you need something else, feel free to ask
Here are some pics of the setup:
Absolutely nothing wrong with the motor..built by a professional builder (Schwanke Engines, sponsor on here) and maintained by a mechanic (me). Any doubts in the condition or sincerity of my words, feel free to contact me. PM me for contact info
Anyways, basic specs on the motor are as follows
- Speed pro flat top pistons and rings
- Eagle connecting rods and ARP rod bolts
- Z20 isky solid cam and lifters
- Kevco 8 qt oil pan (built so theres no oil starvation under heavy acceleration)
- Complete 6AL MSD ignition system (1 month of use) Will sell separate
- PRO heads… intake: 2.02 exhaust 1.6
- Crower roller rockers
- Speed pro hardened push rods
- Moroso high flow/volume oil pump
- Cloyes hex adjust chain and gears
- Edelbrock air-gap intake (1 month of use)
- Edelbrock 600cfm Performer carb (1 month of use)
- Hooker headers flow matched for the set-up
- Comes with the 140amp alternator upgrade, water pump, power steering, and all pulleys. Like I said…Complete motor
PM me if you want pictures of anything
Im asking $1950 w/o full MSD and $2250 with it. I am open to any reasonable offer.
Also have more parts if interested let me know
- Holley Street dominator intake - $80
- TH350 tranny w/ 2800-3200 hole shot b&m stall and shift kit (2 months of use) - $500
- Holly 750 Double Pumper (2 months of use, Extra power valves and jets) $280
- Accel distributor - $60
- HEI distributor w/ msd upgrade (internals) - $80
Probably more that I forgot to list so if you need something else, feel free to ask
Here are some pics of the setup:
Thread
Thread Starter
Forum
Replies
Last Post
Nimoryan
GMT 800 & Older GM General Discussion
0
07-05-2015 03:50 PM