Truck bed FS custom short bed, shaved pockets, pan ect
#71
Thread Starter
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
You would need to re route the fuel fill to the inside of the bed. No big issue really. No, no rust, bed did have a small damaged area under the rear right tail light that was fixed, addressed RIGHT. All pulled out, MIN filler any where. Bed is MINT, just needs a nice wet sand, your paint. You wont be dissopointed..
#76
Thread Starter
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
I had one shipped from MI to here, it was I think 250, but couldn't tell ya now, that was a few years back. If you want to check it out my zip is 21219. Hell your a short drive to MD
Seriously this thing is nice man, it needs a block/wet sand, blast with paint.
Seriously this thing is nice man, it needs a block/wet sand, blast with paint.
#78
Thread Starter
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
Hell I drove to IL for literally a 20 min stay then headed back the same day, round trip about 22 hours. You will not be dis'd in this bed. Even has a snazzy access hole above the fuel pump so you can remove it in 20 min vs 20 hours. Let me know. I do not know why this is still sitting in the yard. :/



