Solid Motor Mounts - 2007-2013 NNBS GM, GMC Trucks and SUV's
#1
Teching In
Thread Starter
Join Date: Nov 2016
Location: San Antonio,Texas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Solid Motor Mounts - 2007-2013 NNBS GM, GMC Trucks and SUV's
I have a set of solid mounts mocked up, I will test fit in the next two weeks. I'm not going into business on these, just a one time run with my set if anyone is interested. Just trying help fellow HP enthusiast.
This is just the rough mock up I will have them cleaned up after test fitting.
Brian
8508198315
If this thread is in the wrong place please let me know..
This is just the rough mock up I will have them cleaned up after test fitting.
Brian
8508198315
If this thread is in the wrong place please let me know..
#3
Teching In
Thread Starter
Join Date: Nov 2016
Location: San Antonio,Texas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
They are designed for GM trucks and will be 2 piece solid mount. I'm running 700 hp and have no concerns. What kind of hp are you talking about?
Keep in mind they will be weled up solid after test fit. The areas that spot welded will have solid beads.
Last edited by 08denaliguy; 07-14-2017 at 04:32 PM.
#5
Teching In
Thread Starter
Join Date: Nov 2016
Location: San Antonio,Texas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Check your drivers side mount to see if it's broken. Lock the brakes and give some gas with someone watching the motor or look for a reddish fluid that leaked from the mount area. The stock mounts are filled with hydrolic fluid. Mine snaps them every few months depending on how many times I jump on it.
My truck is all wheel drive so I get zero tire spin, it just launches. I run 33x12.5 Mickey Thompson all terrain.