I bought these to replace my LS1 fans and they won't fit with my charge piping. I purchased these as NEW GM fans, not aftermarket replacements.

These will also come with the appropriate GM pigtails to splice on to your harness.

$250+ shipping

Ill drive to meet or deliver within reasonable distance for these.

 

I've been looking for these, but I have KB's charge piping too. I thought I remember reading that you were switching to all 3" charge pipe. Where did these interfere? Where the BOV is mounted?

 

Damn, good price! I paid that from a junkyard for used fans!

 

ill post up a pic i took of them tonight when i get to the hotel.
and these fans are awesome!

 

Yeah, the setup I had before with the 70mm was 2.5" from turbo to I/C, then 3" from I/C to TB, my swaybar won't allow the piping to go back far enough on the bottom and the BOV hits the shroud, and the bend going into the TB is too big (too long on the top portion), basically saying the fans stick back toward the motor too far. My LS1 fans fit fine, but I was looking for more cooling capacity.

If they don't sell, Ill be moving things around so they do, They really fit nicely and look much better than my LS1 fan setup...

NOTE: 34" radiator required if you weren't already aware

 

Thanks Nonnie... These things are MUCH bigger and efficient than the LS/LT fans... They are made to cool a truck

 

After I built Ben's, I built anther set and sent to anther guy and he had problems with his hitting his fans and made changes to them (the "S" at the bottom), so when I built yours, I added some clearance to yours, so they might fit on yours. You should have more clearance then Ben has.

 

Here his is with the LS1 Efans...

 

05+ fans vs LS1 Fans

 

you have a pm.