Does me no good to sell this thing as a whole cause it's hacked to ****, so I figure I can sell off some of the connectors if anyone needs them. I have pretty much everything except the neutral safety switch and big round plug for the transmission. Let me know if you need anything.

When I get home tonight I'll post pics and get prices listed for everything.

Anyway, just to get things started, I'll throw up a few specifics. Prices include shipping already.

Truck injector plugs, all 8, missing one or two of the gray clips: $20 for the set
PCM plugs: One red, one blue...$25 each. Make a benchtop PCM harness for programming/flashing.
Trans VSS plug, will pull the wires and PCM pins so it should be plug-and-play (will double-check that these were not cut when I get home) - $15

Pretty much all other plugs I'll do for $15 shipped...let me know if you need something specifically.

 

Happen to have the wiring that leads to the starter?

 

I don't think so, but I'll check tonight.

 

I'm interested in the VSS Plug and harness w/ pins.

I also need another pin with a few feet of wire for efans if thats possible....

 

Cool, I'll post pics tonight for you. I should be able to get another pin and some wire, no problem.

 

well I want the rear 80e VSS and wire/pins too lol

 

LOL I reused those since they weren't part of my engine harness


The front connector is the same as the rear, just pinned to a different location in the PCM plug.

 

Did you get a chance to take a look at these?

 

Sorry, I didn't have a chance to pull the harness apart until this morning. The VSS harness is complete from plug to pins. I also pulled out another wire with a PCM pin, it was one of the trans wires so it should be plenty long for you.

 

I don't have any of the starter wiring, sorry