NVG149 Tcase, SSS rear bumper cover, tail gate cap
#1
SOLD! I have a freshly rebuilt nvg149 transfercase for sale. If you dont know the difference between this and the BW transfercase, this one is not open. it'll "hunt" and put power to the axle WITH traction. I have pictures of all the new bearing and seals installed as well as the pump rub protector plate. If you're serious about purchasing the transfercase I can supply pictures, there's lots. Rebuild consisted of
-Fresh bearings, ALL were replaced with KOYO brand bearings, even the pain in the *** bearing inside the rear output shaft was replaced.
-new seals all around
-removed the crappy stock protector clip and installed a full oil pump protector plate
-new oil filter and O ring
-new tail shaft housing bushing
-comes with new transmission to transfer case gasket as well.
Pretty much a total rebuild. Viscous coupling, chain and oil pump were in great shape. in fact the bearings were all good too (thats how i know the oil pump was doing its job). only replaced them for peace of mind. Ready to go. Asking $900USD + shipping, no core charge. The cheapest I found one for was $1000$ + shipping + core charge. So I believe I'm in the ball park.
SOLD! Silverado SS rear bumper cover, is heavily used. Needs a repaint and repairs as it has some cracking and a small hole on passenger side. Has no spare tire door either. Step pad is in good shape.
Tailgate cap, just a stock, unpainted black tail gate cap with some wear. I stripped all the old double sided tape off of it. $50 USD plus shipping.
Keep in mind that I am in Canada so shipping will be expensive to the U.S. On that note, I am driving down to the U.S in a week or so and will be there for roughly 2 weeks and can bring the items you're interested across with me and can ship them once I get into the U.S. This should greatly reduce shipping costs. PM for more info if you'd like. Thanks for reading.
-Fresh bearings, ALL were replaced with KOYO brand bearings, even the pain in the *** bearing inside the rear output shaft was replaced.
-new seals all around
-removed the crappy stock protector clip and installed a full oil pump protector plate
-new oil filter and O ring
-new tail shaft housing bushing
-comes with new transmission to transfer case gasket as well.
Pretty much a total rebuild. Viscous coupling, chain and oil pump were in great shape. in fact the bearings were all good too (thats how i know the oil pump was doing its job). only replaced them for peace of mind. Ready to go. Asking $900USD + shipping, no core charge. The cheapest I found one for was $1000$ + shipping + core charge. So I believe I'm in the ball park.
SOLD! Silverado SS rear bumper cover, is heavily used. Needs a repaint and repairs as it has some cracking and a small hole on passenger side. Has no spare tire door either. Step pad is in good shape.
Tailgate cap, just a stock, unpainted black tail gate cap with some wear. I stripped all the old double sided tape off of it. $50 USD plus shipping.
Keep in mind that I am in Canada so shipping will be expensive to the U.S. On that note, I am driving down to the U.S in a week or so and will be there for roughly 2 weeks and can bring the items you're interested across with me and can ship them once I get into the U.S. This should greatly reduce shipping costs. PM for more info if you'd like. Thanks for reading.
Last edited by CanadianVRss; Mar 14, 2016 at 05:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FirstGen
GM Drivetrain & Suspension
21
Jan 31, 2024 05:32 AM
fortplainman
GM Drivetrain & Suspension
3
Jun 24, 2016 10:11 AM
lycominghunter
WTB (Wanted To Buy)
4
Jan 9, 2016 12:42 PM



