PerformanceTrucks.net Forums

PerformanceTrucks.net Forums (https://www.performancetrucks.net/forums/)
-   GM Parts Classifieds (https://www.performancetrucks.net/forums/gm-parts-classifieds-23/)
-   -   NNBS Rotors and calipers (https://www.performancetrucks.net/forums/gm-parts-classifieds-23/nnbs-rotors-calipers-556335/)

Drspencer 11-23-2019 05:47 PM

NNBS Rotors and calipers
 
**12/30/2023 edit**

I am deploying and will be out for about a year. Gonna try to continue this with my neighbor but, lookin slim. I’ll update when I can.

2019+ FOUR PISTON calipers and 13.5” rotors removed from a low mileage (~10 miles) Escalade at the dealership to install the Brembo kit. Complete factory GM drop in upgrade for 99-21 6 lug trucks. Advantage of this is a 13.5” rotor (over 12” or 13”) and (close to new (~10 miles) calipers. Bolts place of the old stuff with the included ~.120” washer to center it on the rotor.

Must confirm fitment with your wheels.

Comes with two calipers with pads, two dust shields, two rotors, and four ~.120" washers.

$350 plus shipping and PayPal fees. I do accept Venmo, Zelle, Cashapp, and ApplePay.

If you have a shipping account I can send it on, I can do that, too. One large flare rate box and one 74lb 15x15x8.

can machine the face for another $70

call or text
Thanks
Dan
815-298-2912

https://cimg1.ibsrv.net/gimg/www.per...8e65ce665.jpeg

https://cimg2.ibsrv.net/gimg/www.per...618891505.jpeg

https://cimg7.ibsrv.net/gimg/www.per...3d73fd294.jpeg

adriver 11-24-2019 12:04 AM

PM sent. I'll take em depending on shipping costs, (black coated). (Can I do it that way?) I'm not going to text you at 1 am. I'll see if there's a response later or text when its daylight.


EDIT: Found out shipping quote from seller. Yeah, I'll take em.


EDITED AGAIN: payment sent.

Drspencer 02-22-2020 05:30 PM

Ttt....

53bowtie 03-03-2020 10:59 AM

Didn't end up selling to "adriver"? If not, would these be an upgrade to NNBS silverados as well or just to the NBS silverados?

Drspencer 03-03-2020 11:42 AM

I have a few. And just an upgrade from the NBS. They’re a 13” rotor instead of 12”. But if you want new GM stuff just to have and freshen up, this will work, too.

stroker87 03-03-2020 07:51 PM

i did this upgrade to my 04 rcsb 1/2 ton really like it brakes feel much better then stock even with my 20" wheels, my cousin liked it so much we ordered a set for his truck

so purchased a 2 sets from @Drspencer straight up seller, all parts are in new condition pads and rotors had no wear on them not even broken in!

thanks for the easy transaction!

adriver 03-03-2020 11:39 PM


Originally Posted by stroker87 (Post 5478534)
i did this upgrade to my 04 rcsb 1/2 ton really like it brakes feel much better then stock even with my 20" wheels, my cousin liked it so much we ordered a set for his truck

so purchased a 2 sets from @Drspencer straight up seller, all parts are in new condition pads and rotors had no wear on them not even broken in!

thanks for the easy transaction!

I did get a set, and this for me too. Shipped quick. Very happy.

Avasdad254 03-04-2020 09:48 AM

Do you have another set? How much would shipping be to 78382?

badboy956 03-04-2020 04:39 PM

Let me know if you have another set i'm intrested

Drspencer 03-04-2020 08:01 PM

I do. PM sent. Also. Flying to Detroit Monday. I’ve stuffed rotors in my checked bags before so if someone wants to save $40 on rotor shipping, meet me at the airport.

adriver 03-06-2020 02:11 AM


Originally Posted by Drspencer (Post 5478587)
I do. PM sent. Also. Flying to Detroit Monday. I’ve stuffed rotors in my checked bags before so if someone wants to save $40 on rotor shipping, meet me at the airport.

HAHA.. That's funny. I like that you're tryin to save someone money though.

stroker87 03-06-2020 07:40 AM


Originally Posted by adriver (Post 5478634)
HAHA.. That's funny. I like that you're tryin to save someone money though.

he did this for my set! rotors flew with him to chicago we met and i picked them up while the calipers was shipped

he was actually staying like 6 miles from my house lol

adriver 03-06-2020 06:44 PM


Originally Posted by stroker87 (Post 5478645)
he did this for my set! rotors flew with him to chicago we met and i picked them up while the calipers was shipped

he was actually staying like 6 miles from my house lol

:huh: Somebody should but these so OP can afford some cargo pants.

stroker87 03-06-2020 08:09 PM


Originally Posted by adriver (Post 5478672)
:huh: Somebody should but these so OP can afford some cargo pants.

he was worried since the calipers had brake fluid in them at some point they would not let him take them on the plane and miss his flight so he played it safe and shipped them

johnboy92 03-07-2020 12:21 PM

So does this price include rotors ?

Drspencer 03-07-2020 02:43 PM


Originally Posted by johnboy92 (Post 5478698)
So does this price include rotors ?

yes. Rotors, calipers, caliper brackets, pads. All rolled off the carrier and swapped in the Brembo kit.

F5Sierra 03-07-2020 07:18 PM

02 Sierra
 
Would this set up fit an 02 Sierra 4x4??

Drspencer 03-07-2020 07:32 PM


Originally Posted by F5Sierra (Post 5478716)
Would this set up fit an 02 Sierra 4x4??


yes it will. Gives you another inch of rotor area.

Drspencer 03-19-2020 10:23 PM

4 more sets of black but I think this cleaned them out. Only silver left after this.

someotherguy 03-20-2020 11:13 AM


Originally Posted by Drspencer (Post 5478701)
yes. Rotors, calipers, caliper brackets, pads. All rolled off the carrier and swapped in the Brembo kit.

Steal of a deal for OEM parts and I figured that's where they were coming from; Brembo kit install take-offs.

Richard

infam0us1 03-20-2020 03:42 PM

I need a set of those black ones for my '07 classic WT! PM sent!

infam0us1 03-20-2020 03:43 PM

I need a set of those black ones for my '07 classic WT! PM sent!

F5Sierra 03-20-2020 07:11 PM

Had a bit of a work slow down. Hoping you still have some when this stupid corona virus goes away.

Drspencer 03-20-2020 09:12 PM


Originally Posted by F5Sierra (Post 5479337)
Had a bit of a work slow down. Hoping you still have some when this stupid corona virus goes away.

Got two sets of black left but I can get the zinc coated ones, too.

Tubermaguber 03-21-2020 03:24 AM

Would like a set but cant PM. Shipped to 71674.

infam0us1 03-21-2020 04:09 AM

Payment Sent!!!

ss4chad 03-21-2020 06:45 AM

Looks like you may run out before I can get in on this great deal so will any 2019 Escalade brake rotor, caliper, pads will fit my 2013 Sierra 1500 SLT?
Attaches to the factory bracket, no extension needed?

Chad

Drspencer 03-21-2020 11:51 AM


Originally Posted by Tubermaguber (Post 5479346)
Would like a set but cant PM. Shipped to 71674.


text or call

815-298-2912

Drspencer 03-21-2020 11:52 AM


Originally Posted by ss4chad (Post 5479350)
Looks like you may run out before I can get in on this great deal so will any 2019 Escalade brake rotor, caliper, pads will fit my 2013 Sierra 1500 SLT?
Attaches to the factory bracket, no extension needed?

Chad

yes, it will but you have the same parts. It’s not an upgrade unless you’re just looking for new stuff. I’ll have zinc plated next week if you want them.

ss4chad 03-21-2020 04:00 PM

Oh, well shit, never mind, stay safe and healthy!!

Chad

btbsss 03-23-2020 08:51 AM

Any black left? if so ill take a set. paypal ready

btbsss 03-23-2020 08:51 AM

delete

Drspencer 03-23-2020 09:26 AM


Originally Posted by btbsss (Post 5479441)
Any black left? if so ill take a set. paypal ready

yep. Last one until further notice.

hot66 04-07-2020 06:08 PM

Drspencer:
Any sets available?
Shipping to 76712 business address?
Thanks,
Jeff

Drspencer 04-08-2020 06:38 AM

I’m in Georgia with the national guard “until further notice”. I’ll be going home on the 17th for the weekend and can ship out then.

hot66 04-08-2020 06:50 AM

Thanks!
PM sent.

Drspencer 04-13-2020 02:56 PM

Two zinc plated left

Colby_e32 04-13-2020 09:37 PM


Originally Posted by Drspencer (Post 5480893)
Two zinc plated left

hey man can you get me a shipping quote to 30013, Conyers GA. Thanks !

Drspencer 04-13-2020 10:08 PM


Originally Posted by Colby_e32 (Post 5480919)
hey man can you get me a shipping quote to 30013, Conyers GA. Thanks !

I’m 20 miles south of Conyers in Forsyth right now.....can meet on Monday....

pearl05lade 04-18-2020 09:45 PM

Pm sent


All times are GMT -5. The time now is 07:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands