When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I do not need to sell this but i have interest in something else currently so i am willing to do so. The rear end has roughly 1,500 miles on it and is currently under my 2002 sierra. It was made to fit in stock location other than shocks, has a back brace as well. The center section is a yukon nodular case with a 35 spline HD drag spool and 3.50 gears. the pinion yoke is a 1350 steel with 35 spline moser axles drilled for f-body pattern (5x4.75), it is powder coated with a matte/ wrinkle finish, also not willing to sell the wilwoods with it.
I Also have a 5'' aluminium driveshaft that was built by driveshaft specialist of Texas and could make a deal on that. (fits between this 9'' and a 2wd 4l80)
not interested in trades unless its a jakes trans just want cash, and still i may not take up an offer on a trans.
local pickup only, unless buyer can arrange for shipping
Last edited by TimDave217; Dec 2, 2015 at 05:07 PM.
Do you know if your housing and center section would work in a 2010 crewcab 1500?
I don't know the specs on the newer trucks, but i know it will fit anything from a 99-06 1500 since they are all the same width. if you know the width of yours is the same as those years it would fit.
Originally Posted by 6.0l RST
will those rotors and calipers fit a 15" wheel
yes, that's what is currently on my truck right now.
Dec 2, 2015 | 04:58 PM
Moser M9 9 Inch
