This is the same cam in my Radix/headers listing. The Radix & headers are sold so i'm posting the cam seperately.
$250 shipped

If you like the Vinci "The Trucker" cam this is what you need. So close to the same thing it isn't worth the extra cost IMO.
This is the specs on the Vinci cam. Mine are in the title of course.

DUR @ .004" 278*/ 286*
DUR @ .050" 216*/ 224*
* LIFT .551/.551
OVERLAP 53*
LSA 115* "THE TRUCKER"
STREET / STRIP / POWER
POWER RANGE 2000 TO 6200
TUNING REQUIRED
POWERFUL CHOPPY IDLE
DYNAMITE WITH A SUPERCHARGER

 

I just happen to considering the Trucker as my next cam. Do you have the rest of the specs on your cam?

 

good luck, that just happens to be what I am looking for. too bad I am so strapped for cash...

 

This is all the specs I have. If I best remember it has 4* advance in it. I'm thinking the Intake centerline is 110. I bought it used from Farmerbeau. It has about 7k miles on it.

 

how good did the truck idle with this cam? or did you ever install it?

 

It idled well. It was choppy, but once the tune was dialed in it ran like stock. On a non drive by wire system it would be even easier to get it to idle correcty from what I'm told.

 

Excellent everyday driver supercharger cam with a little bump . Anybody?

 

I am deffinately interested in this camshaft. If you still have it next week, I will have enough overtime pay to get it. Please let me know if anything happens to it. did you ever have any dyno numbers with this cam and no forced induction?

 

I still have it. I put the cam in after I put the blower on. Farmerbeau had this cam in his 5.3 for 100 miles before I bought it. He said it ran great in his. His dad made him put the truck back stock. That is how I ended up with it.

 

It had great power for the <100miles i put on it. I bought this cam from a friend who never had installed it. From what he said, it is a nitrous cam. The NA power was great and i didnt even have it tuned.