Ls6 243 Heads 59cc Chambers Hollow Stem Valves
#1
Ls6 243 Heads 59cc Chambers Hollow Stem Valves
SOLD
I have a set of zo6 LS6 243 Casting Heads with the Hollow stem (sodium filled)
valves and LS6 valve springs good for .570" lift that were milled .030 to 59cc
Chambers. Very low miles on these heads, these were bought off a car with 15k
and were inspected, milled and the valves lapped and never reinstalled. These
are ready to install. I was going to use these on my Lq9 build but I found a
great deal on some P/P 317's so these must go.
SOLD
I have a set of zo6 LS6 243 Casting Heads with the Hollow stem (sodium filled)
valves and LS6 valve springs good for .570" lift that were milled .030 to 59cc
Chambers. Very low miles on these heads, these were bought off a car with 15k
and were inspected, milled and the valves lapped and never reinstalled. These
are ready to install. I was going to use these on my Lq9 build but I found a
great deal on some P/P 317's so these must go.
SOLD
Last edited by Bigschwerm; 01-04-2011 at 10:28 AM. Reason: Sold
Thread
Thread Starter
Forum
Replies
Last Post
BigEd_72455
GM Parts Classifieds
0
08-08-2015 04:49 PM
07NBSChevy
GM Engine & Exhaust Performance
20
07-08-2015 07:27 PM