LS1 parts
#1
Thread Starter
11 Second Club
iTrader: (10)
Joined: Sep 2007
Posts: 207
Likes: 0
From: branson missouri
ECM/harness complete uncut 6spd harness and ecm. Ecm has vats, rear O2's and smog turned off. Perfect for a swap! 325 shipped
LS6 intake complete with t/b, rails and injectors 350 shipped
Radiator/fans 150 shipped
Oil pan, pickup tube and windage tray 200.00 shipped
LS1 T56 setup. Will include the following
Rebuilt T56 less than a 1k miles on it. New bearings, seals, synchros, input shaft, bronze fork pads, reverse and 3-4 slider assembly.
Tick adjustable master with hose and GM slave with new throwout bearing
Stock bellhousing
Spec 3 clutch
spec steel flywheel
Short throw shifter, no markings? Factory SLP?
Urethane mount
6spd cross member
Pedal assembly
upper console.
Going to start at 2350 obo PLUS shipping or picked up. I may separate some of this.
LS1 front drive accessories. Alternator and bracket, p/s pump and bracket, w/p with tensioner, balancer. a/c compressor and bracket. 350 shipped
LS1 block has some internal damage from broken rod. I think its saveable or just use for mock up. 150 picked up
Ill be adding more with pics shortly.
PM's will be answered in order of being recieved, email, call or text ok. Please no calls after 10pm CST 417-294-7869
Thanks David



LS6 intake complete with t/b, rails and injectors 350 shipped
Radiator/fans 150 shipped
Oil pan, pickup tube and windage tray 200.00 shipped
LS1 T56 setup. Will include the following
Rebuilt T56 less than a 1k miles on it. New bearings, seals, synchros, input shaft, bronze fork pads, reverse and 3-4 slider assembly.
Tick adjustable master with hose and GM slave with new throwout bearing
Stock bellhousing
Spec 3 clutch
spec steel flywheel
Short throw shifter, no markings? Factory SLP?
Urethane mount
6spd cross member
Pedal assembly
upper console.
Going to start at 2350 obo PLUS shipping or picked up. I may separate some of this.
LS1 front drive accessories. Alternator and bracket, p/s pump and bracket, w/p with tensioner, balancer. a/c compressor and bracket. 350 shipped
LS1 block has some internal damage from broken rod. I think its saveable or just use for mock up. 150 picked up
Ill be adding more with pics shortly.
PM's will be answered in order of being recieved, email, call or text ok. Please no calls after 10pm CST 417-294-7869
Thanks David



Thread
Thread Starter
Forum
Replies
Last Post



