so what all is involved in doing this mod for an 01 2500 hd with the 6.0?

 

These are the correct fans I assume?

 

correct

 

do you need a 34" radiator for those fans?? or will they work on the smaller radiator?

 

Those will work with the smaller radiator.

 

34' radiator is required for the new e-fans from the NNBS trucks

 

Your gonna need the 34" radiator off the 05 and up trucks, the bolts to bolt em into the factory place and a harness and a tune.


Just remove your clutch fan and install the e fans (They bolt right up.) and depending on who you get your harness from it will come direction or not. I got the bolts from Home Depot so they are common bolts

 

http://cgi.ebay.com/ebaymotors/1993-...QQcmdZViewItem

Will these fans work with a 34" radiator??

 

those will work but they are meant for the 28" radiator. Those are ls1/lt1 fans off of a camaro.

If you HAVE to use the 34" radiator then you could probably get by using those, but I wouldn't neccessarily recomend it.

 

I already have perma cool fans with my 28" radiator but the truck is over heating i think it's the radiator...plus the heat here in AZ