LS1 ASA Dry sump engine, 409 RWHP. Orig or AFR heads- $2500 in AZ
#1
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Sep 2006
Location: Any dragstrip any time
Posts: 942
Likes: 0
Received 0 Likes
on
0 Posts
LS1 ASA Dry sump engine, 409 RWHP. Orig or AFR heads- $2500 in AZ
LS1 ASA Dry sump engine,
ARE Low profile drysump pan, Perfect for conversions.
Razor 2 stage dry sump pump,
ASA Cam,
accessory drive pulleys,
water pump,
Alternator,
LS1 heads,
LS1 intake,
Coil packs
ARP head studs,
Super balancer.
Was $3900 shipped. Reduced for Local pick up cash price only to $2500
This is a complete engine now, or it can be had with the AFR heads and LS6 intake below.
Or $4900 as shown with AFR 225 LS1 heads, 65 cc chambers (New in from AFR early July), 4 pulls on dyno. LS6 intake. Included with AFR heads is an LS6 intake/rails/Injectors. As you know these heads flow well over 300 cfm at only 0.600 lift and can also fit the smaller bore Ls1 block. They also feature the 3/4" deck which can handle boost and N2O much better than the factory heads.
ARE Low profile drysump pan, Perfect for conversions.
Razor 2 stage dry sump pump,
ASA Cam,
accessory drive pulleys,
water pump,
Alternator,
LS1 heads,
LS1 intake,
Coil packs
ARP head studs,
Super balancer.
Was $3900 shipped. Reduced for Local pick up cash price only to $2500
This is a complete engine now, or it can be had with the AFR heads and LS6 intake below.
Or $4900 as shown with AFR 225 LS1 heads, 65 cc chambers (New in from AFR early July), 4 pulls on dyno. LS6 intake. Included with AFR heads is an LS6 intake/rails/Injectors. As you know these heads flow well over 300 cfm at only 0.600 lift and can also fit the smaller bore Ls1 block. They also feature the 3/4" deck which can handle boost and N2O much better than the factory heads.
Thread
Thread Starter
Forum
Replies
Last Post
FlowmasterMufflers
Ford Engine & Exhaust Performance
0
07-22-2015 01:29 PM
FlowmasterMufflers
GM Engine & Exhaust Performance
0
07-17-2015 03:26 PM
FlowmasterMufflers
Foreign Performance Discussion
0
07-09-2015 12:23 PM
FlowmasterMufflers
Foreign Performance Discussion
0
07-09-2015 12:00 PM