Ls parts and fittings fs
#1
Ls gaskets, parts and fittings fs
-Billet Oil cap vent with -8an, has couple small scratches on it-$20
-Cometic head gaskets, 4.060 bore .030 thick, $50 for both they cost $78ea
-89060436 rear cover seal -$10
-B&M trans cooler, came off a running driving truck not failed trans or converter, has hose barb ends, $50 11”x11”
- Ict billet ls3 intake gaskets new $20
- Russel fuel filter clamps 2”&2.2” $10ea
- A -8an rollover vent valve forget brand new unused $10
- Four earls -10an to -8an oring fittings, $20 for all four
- Four holley -6an to -8an oring fittings, $20 for all four
- Ls1/ls6 timing chain dampner, these were made for blocks that didnt come new with a dampner installed but had holes for one-$20
-Magnafuel fittings
1 -10an y fitting $20
2 -12an to -12an o-ring fittings $30 for both
-Cometic head gaskets, 4.060 bore .030 thick, $50 for both they cost $78ea
-89060436 rear cover seal -$10
-B&M trans cooler, came off a running driving truck not failed trans or converter, has hose barb ends, $50 11”x11”
- Ict billet ls3 intake gaskets new $20
- Russel fuel filter clamps 2”&2.2” $10ea
- A -8an rollover vent valve forget brand new unused $10
- Four earls -10an to -8an oring fittings, $20 for all four
- Four holley -6an to -8an oring fittings, $20 for all four
- Ls1/ls6 timing chain dampner, these were made for blocks that didnt come new with a dampner installed but had holes for one-$20
-Magnafuel fittings
1 -10an y fitting $20
2 -12an to -12an o-ring fittings $30 for both
Last edited by skolman91; 06-26-2018 at 04:10 PM.