do you have any clip of the cam? and what stall r u runing? and what all do i need with the cam. springs and lifters?

 

Looking at your sig...RPM actually did the cam install on the truck...I got some PAC springs good to .650 lift installed with it. The cam and springs alone gave me 30 to the wheels...I'm sure Ryan can show you the dyno graph for it. I ran the stock converter for a while with no issues until I got a 2800 stall and dropped .5sec ET with just the addition of the converter and re-tune. The cam doesn't require a phaser which I didn't have, but you may or may not want to get one.

 

Here's a vid of the cam...
http://www.youtube.com/watch?v=DtjZzFPiwGw

 

Are the heads stock castings or ported?

 

Heads are completely stock with exception of the PAC springs.

 

Heads and springs SOLD...cam and intake still available.

 

intake complete with rails and crossover and anything else? Or just bare L92 intake?

 

Heads, springs, intake, and spacer are SOLD...
Cam is still available

 

got everything on friday thanks for everything