1SlowHoe

iTrader: (28)

When is payday? I could hold them for you for a little while.

Nope. Needed the 2300 for the 408

This

It has Corvette electronics on it. My '02 didn't use a TAC module and I couldn't use a Dr. X harness because of traction control and fly by wire. I ended up putting early model Corvette sensor and motor so it would open the right way. I have an LS2 (1 plug) to LS1 (2 plug) harness that I can include for free if you needed that.
I also found out while trying to make my Frankenstein model year work, that if you swap the yellow and brown wires in the stock harness, it reverses the way the blade opens and the TPS doesn't know the difference. So if you take time to figure it out you make this thing work on just about any LS motor.

Fastcount03

iTrader: (13)

I wonder if I could put a 78mm tb motor on it? I am interested.

1SlowHoe

iTrader: (28)

Dang, I was just in Lawton last night. Could have let you test it out.

JCunningham

iTrader: (4)

cool iv only seen the 2300 with the external shaft.

Fastcount03

iTrader: (13)

Well I'm down in south Texas anyways. lol

1SlowHoe

iTrader: (28)

Am I going to have to put this blower on eBay?

Atomic

iTrader: (42)

How much for just the blower without injectors?

I have a 370 idea I might could use this for...roots blowers are just way too fun for DDs.

JCunningham

iTrader: (4)

an then how much for the injectors? and what make are they? PM me price

1SlowHoe

iTrader: (28)

PM sent

1SlowHoe

iTrader: (28)

Not sure, I'd say $275 but lets see what Atomic says before I go parting this thing out.
I have a phenolic spacer for this blower, with longer bolts for the fuel rails, that I never installed. I'd take $450 for
Injectors are sold