Bringin it back to life

 

Any new price on this cam? I might be interested...

 

PM sent

 

bump bump

 

Final price reduction $325 shipped....

 

You were running this cam in a 6.0 right? I can't tell much about the lope from your clip. I have a 5.3 and wanting more of a torque cam, and to be able to run less stall, maybe from 2500-2800 converter, but I am wanting it to lope hard, which is why I like the 112 LSA.

Also, what springs were you running with it?

 

You don't have enough off-topic posts in here, so I'll ask - what cam are you running now?

 

If this thing was 114 or 115 lsa I would have bought it already.

bump for ya

 

Lots of Tq with this cam. Pulls all the way to 6000rpm, I did it on the dyno. It was in my 6L/Radix combo. I ran a 2600 stall with it. Here is a clip of it in a vette, 5.7L I assume. Its not as lopey as youd expect for a 112 lsa, even though it has 52* of overlap. I was running Vinci dual springs. They were way overboard for this cam. I bet some 918's would be fine.
http://www.vincihighperformance.com/...%20LS1%202.htm
You will have to scroll down to the 062 sound byte.

 

GT2-3, still untuned.