SPDASND

I just finished up an N/A build on my 5.3, as well as a 4L80 swap. I have more to list other than what is below, so if you are looking for something specific shoot me a PM. I might have it (OEM and aftermarket). All parts located in NoVA if you are local and want to avoid shipping.

1. OEM Flat Flexplate, p/n 19260102 ($80 SHIPPED)
- NEW. I thought I needed it for my 4L80 swap ...nope, I did not. (new converter spec'd for my oem dished flexplate)

2. OEM Flexplate Spacer, p/n 12563532 ($40 SHIPPED)
- NEW. I thought I needed it for my 4L80 swap ...nope, I did not.

3. OEM Converter-to-Flexplate Bolts, p/n 11589040 ($FREE if you buy all six ...Happy Holidays)
- NEW. I thought I needed it for my 4L80 swap ...nope, I did not.

4. OEM 4L60E Neutral Safety Switch ($10 SHIPPED)
- Came off my 5.3L LM7 with 88k miles. No issues with it; I just decided to install a new one during my 4L80 swap.

5. OEM 4L60E Trans Cooler ($60 SHIPPED)
- Came off my 5.3L LM7 with 88k miles. No issues with it; I just decided to upgrade to a larger cooler for the 4L80.

6. OEM 4L80E Trans Cooler Fittings ($FREE ...Happy Holidays)
- Came with my built trans; however, I went with AN fittings.

7. OEM AC Delco 5.3L LM7 Thermostat ($20 SHIPPED)
- I don't know what pumps this will fit, just mentioning it was installed on my LM7 (only 500 miles on it as I changed my mind and went with a 160* t-stat instead)

8. OEM Trans Output Shaft Seal, p/n 8677463 ($10 SHIPPED)
- NEW. I thought I needed it for my 4L80 swap ...nope, I did not.

9. OEM 4L80E Tailshaft Housing, p/n 8677464 ($60 SHIPPED)
- Came with my built 4L80E. The I.D. of the bearing is on the smaller end of the tolerance; my Sonnax yoke fit, but it was extremely tight. I did not feel like honing out the bearing, so I just bought a new housing. Note that it does not come with the rubber o-ring seal.

10. Aftermarket, OEM-like, Coolant Reservoir ($20 SHIPPED)
- Only 500 miles on it; decided to go with a custom aluminum combo tank instead.

11. ICT Billet 4L80E Trans Cooler Fittings, 6AN, p/n 551124 ($10 SHIPPED)
- NEW. Bought as a spare set, did not need them.

12. Sonnax Short Selector Shaft ($20 SHIPPED)
- NEW. Came with my built 4L80, but I needed the long shaft since I'm still running the NSS.

13. ARP Flexplate-to-Crank Spacer Bolts, p/n 244-2902 ($20 SHIPPED)
- NEW. I thought I needed it for my 4L80 swap ...nope, I did not.





























​​

chevykev

Interested in the 2wd tail housing. Pm me have a few questions thanks