F1d Custom Procharger Kit AWD TBSS
#1
Teching In
Thread Starter
Join Date: Aug 2012
Location: CBUS OHIO
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
F1d Custom Procharger Kit AWD TBSS
Demodding the highest HP AWD TBSS that we know of.
12 rib direct drive f1d procharger setup.
$6000.
Trailblazer SS ProCharger Supercharger System - House of Boost :: We Make Fast Stuff FasterŽ - (Powered by CubeCart)
Retail is over $6,000 for the "base" kit.
Pulleys $109ea
12 rib belts $100ea
6 rib belts $40ea
8 rib HD belt $80ea
8rib/12rib setup $400
Oversized FMIC $480
Custom intake piping from HOB $400
Red race valve upgrade $300
All the above is retail! So save a couple grand and make some real HP!!!
NEW HOB washer relocate kit 200 (FREE to buyer of S/C kit)
Includes V2 bracket kit
Oversized I/C (roughly 3.5 times the size that comes from HOB), requires cutting front support and relocating air bag sensors, will swap bumper support if local
4" 12r,
4" 8r,
3.85 (custom) 12r,
4.38 8r,
2 12r belts (1 new:
2 sets of dual 6 rib belts
1 12 rib hub
1 8 rib hub
ATI damper (NO pin kit, as my crank was specially keyed for this)
Custom HOB 4" intake pipe to allow an LS7 MAF (includes LS7 maf), and boot
2 extra bottles of SC oil
All clamps upgraded to T bolt style (150$ upgrade)
1 used k+n
1 LOW mile Edelblock filter (10")
ATI dampner
Thanks,
Jeremiah
jjh4296@msn.com
614eight3two599eight
PICS ARE OLDER PICS. KIT IS CURRENTLY INSTALLED, BUT IS BEING REMOVED THIS WEEKEND (7.19.14)
12 rib direct drive f1d procharger setup.
$6000.
Trailblazer SS ProCharger Supercharger System - House of Boost :: We Make Fast Stuff FasterŽ - (Powered by CubeCart)
Retail is over $6,000 for the "base" kit.
Pulleys $109ea
12 rib belts $100ea
6 rib belts $40ea
8 rib HD belt $80ea
8rib/12rib setup $400
Oversized FMIC $480
Custom intake piping from HOB $400
Red race valve upgrade $300
All the above is retail! So save a couple grand and make some real HP!!!
NEW HOB washer relocate kit 200 (FREE to buyer of S/C kit)
Includes V2 bracket kit
Oversized I/C (roughly 3.5 times the size that comes from HOB), requires cutting front support and relocating air bag sensors, will swap bumper support if local
4" 12r,
4" 8r,
3.85 (custom) 12r,
4.38 8r,
2 12r belts (1 new:
2 sets of dual 6 rib belts
1 12 rib hub
1 8 rib hub
ATI damper (NO pin kit, as my crank was specially keyed for this)
Custom HOB 4" intake pipe to allow an LS7 MAF (includes LS7 maf), and boot
2 extra bottles of SC oil
All clamps upgraded to T bolt style (150$ upgrade)
1 used k+n
1 LOW mile Edelblock filter (10")
ATI dampner
Thanks,
Jeremiah
jjh4296@msn.com
614eight3two599eight
PICS ARE OLDER PICS. KIT IS CURRENTLY INSTALLED, BUT IS BEING REMOVED THIS WEEKEND (7.19.14)
#2
Teching In
Thread Starter
Join Date: Aug 2012
Location: CBUS OHIO
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Lowered Price!
$5000 plus shipping and any PP fees.
You will not find a better more complete kit with this power potential.
Email-jjh4296@msn.com
$5000 plus shipping and any PP fees.
You will not find a better more complete kit with this power potential.
Email-jjh4296@msn.com
#4
On The Tree
iTrader: (5)
bump, this is a good deal :thumbs:
it WILL! get some 3" piping and have it fitted to your truck. the blower will basically bolt on, your only real changes needed is I/C plumbing, and youll need a modified upper radiator hose. other than that, your in business son! that intercooler will fit up top on an SSS.
question to OP- you were running this thing on a MAF???
it WILL! get some 3" piping and have it fitted to your truck. the blower will basically bolt on, your only real changes needed is I/C plumbing, and youll need a modified upper radiator hose. other than that, your in business son! that intercooler will fit up top on an SSS.
question to OP- you were running this thing on a MAF???
Thread
Thread Starter
Forum
Replies
Last Post
D1SCSS
GM Parts Classifieds
44
01-25-2016 10:14 PM
maxspeed05V
GM Parts Classifieds
0
07-19-2015 07:08 PM