EFILive FlashScan V1 Commercial
Dec 12, 2006 | 10:28 PM
#1
EFILive FlashScan V1 Commercial
****SOLD SOLD SOLD SOLD SOLD****
Up for sale is a practically brand new EFILive FlashScan V1 Commercial interface. I have only used it to scan my pcm once; it still has the stock plastic ties on the cables
. I recently upgraded to the V2 interface so I do not need this V1 interface anymore.
This unit was purchased in August ‘06 just before EFILive brought their new V2 interface to market (when it was still $849
). These units are now sold by EFILive for $549 + 50 shipping from New Zealand (and comes with 2 PCM licenses).
The V1 interface has the commercial upgrade so you can do full reflashes with it such as flashing a 2001 OS into a 99 or flashing in a custom operating system (2bar, etc) or recovery from a failed flash or flashing a new (blank) pcm. It can also log external data through two built-in, 10 bit, analog to digital converters that can be used to integrate wide-band O2 data or any analog voltage from 0 to 4.8 volts directly with EFILive’s logged data stream. There is also a cold junction compensated, k-type thermocouple input can measure temperatures from 0°C to 1024°C (32°F to 1875°F) for logging boost or exhaust gas temperatures.
All FlashScan V1 Hardware includes:
Blackbox Logging
Wideband O2 Logging
Scanning
Tuning
Commercial V1 Hardware also includes:
Custom Operating Systems
Speed density
2/3bar
N20
Duramax Custom Operating System
DSP2 - On the fly Switchable tune
Here's a good video that gives an overview of the capabilities of EFILive FlashScan:
http://www.autotap.com/files/EFILiveHigh.wmv
More detailed info can be found here:
http://www.efilive.com/overview_flash1.aspx
http://www.efilive.com/overview_custom.aspx
http://www.efilive.com/overview_scanChecklist.htm
http://www.efilive.com/overview_checklist.htm
Since I used this unit to upgrade to the V2 interface, it cannot be used to upgrade to V2 again. Additionally, once upgraded to V2 the number of available PCM licenses on the V1 interface are it, you can’t add more. Because of this I’m offering the unit with two PCM licenses at $150 less than the new purchase price and I can add up to 3 additional PCM licenses before I do the upgrade for $75 a piece (PCM licenses are normally $99). That way you have the ability to tune more vehicles in the future if needed.
This is a long sale post, but I want people to understand what they are buying. This is a very powerful tuning tool for the money. Paypal accepted.
Up for sale is a practically brand new EFILive FlashScan V1 Commercial interface. I have only used it to scan my pcm once; it still has the stock plastic ties on the cables
. I recently upgraded to the V2 interface so I do not need this V1 interface anymore. This unit was purchased in August ‘06 just before EFILive brought their new V2 interface to market (when it was still $849
). These units are now sold by EFILive for $549 + 50 shipping from New Zealand (and comes with 2 PCM licenses).The V1 interface has the commercial upgrade so you can do full reflashes with it such as flashing a 2001 OS into a 99 or flashing in a custom operating system (2bar, etc) or recovery from a failed flash or flashing a new (blank) pcm. It can also log external data through two built-in, 10 bit, analog to digital converters that can be used to integrate wide-band O2 data or any analog voltage from 0 to 4.8 volts directly with EFILive’s logged data stream. There is also a cold junction compensated, k-type thermocouple input can measure temperatures from 0°C to 1024°C (32°F to 1875°F) for logging boost or exhaust gas temperatures.
All FlashScan V1 Hardware includes:
Blackbox Logging
Wideband O2 Logging
Scanning
Tuning
Commercial V1 Hardware also includes:
Custom Operating Systems
Speed density
2/3bar
N20
Duramax Custom Operating System
DSP2 - On the fly Switchable tune
Here's a good video that gives an overview of the capabilities of EFILive FlashScan:
http://www.autotap.com/files/EFILiveHigh.wmv
More detailed info can be found here:
http://www.efilive.com/overview_flash1.aspx
http://www.efilive.com/overview_custom.aspx
http://www.efilive.com/overview_scanChecklist.htm
http://www.efilive.com/overview_checklist.htm
Since I used this unit to upgrade to the V2 interface, it cannot be used to upgrade to V2 again. Additionally, once upgraded to V2 the number of available PCM licenses on the V1 interface are it, you can’t add more. Because of this I’m offering the unit with two PCM licenses at $150 less than the new purchase price and I can add up to 3 additional PCM licenses before I do the upgrade for $75 a piece (PCM licenses are normally $99). That way you have the ability to tune more vehicles in the future if needed.
This is a long sale post, but I want people to understand what they are buying. This is a very powerful tuning tool for the money. Paypal accepted.
Last edited by 350SS; Dec 14, 2006 at 05:43 PM.
Dec 12, 2006 | 10:48 PM
#2
hot damn I got a good deal from XLR8NSS. Good luck on your sale.
I picked up his V1 when he upgraded. It works great, and zero problems with unit after the original seller upgraded
I picked up his V1 when he upgraded. It works great, and zero problems with unit after the original seller upgraded
