Complete 6 lug 10 bolt 4.10 disk rear end
Apr 11, 2007 | 11:00 AM
#13
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
04 To 06 I Dont Believe Is A Major Deal.... Just Make Sure You Guys Use A Micrometer And Check The Brake Lines/fittings To Make Sure Everything Will Bolt Right Up...
And Remmeebr That Your Abs Components May Need To Be Diabled..... Otherwise It Is Programmed To Send Certain Pressures To Each Wheel, And As You Can Imagine If It Is Programmed For A Certain Setup Taht Would Cause Hell If It Was Activated
And Remmeebr That Your Abs Components May Need To Be Diabled..... Otherwise It Is Programmed To Send Certain Pressures To Each Wheel, And As You Can Imagine If It Is Programmed For A Certain Setup Taht Would Cause Hell If It Was Activated
Apr 11, 2007 | 11:07 AM
#14
Well I am having that issue currently because my speedo is off due to the 6 speed swap I did. So that freakin light is always on and my brakes make a rachet sound on the pedal when stopping. 
Apr 11, 2007 | 06:19 PM
#15
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by 04GIBBS
Well I am having that issue currently because my speedo is off due to the 6 speed swap I did. So that freakin light is always on and my brakes make a rachet sound on the pedal when stopping.
PULL THE ABS FUSE... AND IF THE LIGHT ANNOYS YOU BLACK VINYL ELECTRICAL TAPE GOES A LONG WAY
Apr 11, 2007 | 07:27 PM
#16
AHH damn you got jokes my man. I have to wait until I switch the rear and then change the tire size and then ride along someone and go thur the gears to see where my speedo is in accordance with theres.
So for now I have to enjoy those freakin lights.
So for now I have to enjoy those freakin lights.
Apr 11, 2007 | 10:12 PM
#18
Originally Posted by BirchSSclone
My truck originally came with disk, as did this rear end. The new 14 bolt will be drum so I can run some 15" wheels with slicks. I'm trying to figure out now what all would be needed to swap this disk rear end into a drum brake truck. I'm thinking that the e-brake cables would be different as well as the brake lines, but I'm not 100% sure on that 
Apr 11, 2007 | 10:15 PM
#19
Originally Posted by 04GIBBS
Well I am having that issue currently because my speedo is off due to the 6 speed swap I did. So that freakin light is always on and my brakes make a rachet sound on the pedal when stopping.
