cleaning house!! C5 & GMC/Chevy parts up for grabs!
10-03-2011, 09:58 AM
#1
cleaning house!! C5 & GMC/Chevy parts up for grabs!
so i've been hoarding spare parts for too long & now i've been motivated to get rid of all these parts that've been taking up space. besides... the roommate's also ready to see this stuff go, so make me a reasonable offer & it's yours 
all suggested prices are before shipping.
for detailed pics of individual items, check the photobucket album so as not to eat up bandwidth here.
**new policy**
first one to pay gets the parts
parts list:
2000 FRC Corvette - 45,000mi unless otherwise stated
1999 GMC Sierra 1500 - these parts fit 99-07 Sierra/Silverado/SUVs
2001 Chevy Tahoe - also fits 99-07 trucks/SUVs
Summit 2.5" stainless band clamp (never used, just test fitted once) - $5
*BRAND NEW, UNUSED* standard 2.5" exhaust clamp - $3
all suggested prices are before shipping.
for detailed pics of individual items, check the photobucket album so as not to eat up bandwidth here.
**new policy**
first one to pay gets the parts
parts list:
2000 FRC Corvette - 45,000mi unless otherwise stated
- stock hood with light/harness - gone
- LS1 intake, fuel rails, injectors - sold
- LS1 78mm throttle body - sold
- valley cover - sold
- coolant crossover tube - sold
- belt tensioner without pulley - sold
- exhaust manifolds (43k mi) - $100
- mid-pipe with 2 cats (43k mi) - $250
- LG smooth air bridge with silicon boot, 2 hose clamps, and IAT sensor (only used 6 months/4000mi) - sold
- headlight control module (46k mi) - sold
- *BRAND NEW, UNUSED* RH headlight with new bulbs - $200
- factory polished thin spoke front wheels (17x8.5) - sold
1999 GMC Sierra 1500 - these parts fit 99-07 Sierra/Silverado/SUVs
- Y-pipe with 2 cats (167k mi) - sold
- truck 3rd brake light with bulbs (removed & boxed in 2007 @ 130k mi) - $30
- both truck tail lights (removed & boxed in 2007 @ 130k mi) - sold
- full set of chromed steel 16x6.5 wheels with center caps & lug nuts (removed & boxed in 2010 @ 160k mi) - $300
2001 Chevy Tahoe - also fits 99-07 trucks/SUVs
- exhaust manifolds (122k mi) - $50
- EGR solenoid/tubes (122k mi) - $30
Summit 2.5" stainless band clamp (never used, just test fitted once) - $5
*BRAND NEW, UNUSED* standard 2.5" exhaust clamp - $3
Last edited by _zebra; 08-03-2012 at 12:05 AM. Reason: pricing added
10-07-2011, 11:34 PM
#5
is this intake what I need to put on a 5.3, also can i use the cable tb off the stock intake, cause its not dbw? and i have a modified harness from a 99 camaro, will this work with it?
10-08-2011, 02:36 AM
#6
coolant crossover is sold
this intake is off an LS1 corvette, but it will work with 5.3 heads if you want. if it's going in a truck, you'll lose some bottom-end torque over the stock intake, but i've seen plenty of people use them for high RPM applications. i'd say the cable TB will work - it's made for a 78mm, and i think some of the camaros had cables (but don't hold me to that). i don't know on the harness. are you wanting the fuel rails & injectors, too?
this intake is off an LS1 corvette, but it will work with 5.3 heads if you want. if it's going in a truck, you'll lose some bottom-end torque over the stock intake, but i've seen plenty of people use them for high RPM applications. i'd say the cable TB will work - it's made for a 78mm, and i think some of the camaros had cables (but don't hold me to that). i don't know on the harness. are you wanting the fuel rails & injectors, too?
10-08-2011, 04:27 PM
#7
coolant crossover is sold
this intake is off an LS1 corvette, but it will work with 5.3 heads if you want. if it's going in a truck, you'll lose some bottom-end torque over the stock intake, but i've seen plenty of people use them for high RPM applications. i'd say the cable TB will work - it's made for a 78mm, and i think some of the camaros had cables (but don't hold me to that). i don't know on the harness. are you wanting the fuel rails & injectors, too?
this intake is off an LS1 corvette, but it will work with 5.3 heads if you want. if it's going in a truck, you'll lose some bottom-end torque over the stock intake, but i've seen plenty of people use them for high RPM applications. i'd say the cable TB will work - it's made for a 78mm, and i think some of the camaros had cables (but don't hold me to that). i don't know on the harness. are you wanting the fuel rails & injectors, too?