I have a very nice set of 799 heads for sale. I bought them new and have only put about 5k miles on them. They were milled 0.022" by Richard at WCCH to get 61cc chamber volume. They have PAC 1218 springs installed with stock retainers and locks.

Only flaw is that the threads for one of the steam ports on one of heads aren't in great shape, so you need to be very careful when tightening the bolt. It was fine for me, no leaks, just be careful. Or you can drill and tap the hole to something a tad larger than 6mm.

SOLD

Please PM me, thanks!