here is some parts i dont need anymore.


1. stock 5.3 60E flexplate. $25 + shipping. has the normal surface rust.

2. flexplate spacer for the crank. $40 + shipping. doesn't come with bolts. brand new.

3. paxton SN93 pulley, tensioner and idler. $60. + shipping

• 1 drive pulley 2 1/2" diameter for a 1" wide serpentine belt. It should fit Paxton SN series, Vortech. It has a keyway, but does not come with a key.
• 1 idler pulley 3 3/4" diameter for a 1" wide serpentine belt. This one has no ribs, but has a flange for belt tracking. It has a few tiny chips in the flange, but this should not effect operation
• 1 idler pulley 5 1/4" diameter for a 1" wide serpentine belt. This one has ribs and a flange for belt tracking. It has a few tiny chips in the flange, but this should not effect operation - see the photos for better detail.
• 1 idler pulley 3 1/4" diameter for a 1" wide serpentine belt on a slotted steel bracket. The idler assembly is 2.75" from the base to the top edge of the pulley. The bracket is about 6.75" long. The slots are 2.5" long x .50" wide.

the idler in the top left of the pictures is gone.



4. 4l60E 4wd adapter. $20 this peice bolts inbetween the transmission and the transfer case.

 

Ttt..

 

pm sent