TTT!!! Sunday Night Bump

 

Let me know if you want to ship. I am interested in one of the block quite possibly. A friend of mine needs it for his Camaro build

 

You got it. Come Saturday I will open it up to shipping.

 

any updates?? shipping a go?

 

Short Block sale pending to ZR1 DREAMING.

Block and Crank are still left at this time. If no one inqures about it by Saturday then I will open it up for shipping.

I will let you know if the bare block Falls through. I might part with my own personal 6.0L Bare Block.

 

Don't forget that I sent the PMs and should be in line accordingly if you chose to ship

 

Dont worry, I saved everyone's PM's and personal Emails for just such an occasion. I will post a list with date's and Time stamps should I need to just to be fair to everyone.

 

ZR1 DREAMING backed out. Short Block Still for sale

The Bare block and crank are also still up for sale too...

Today I pulled the cam on the short block for a closer Look and I would recomend replacing the cam bearings... also not so visible is in the pictures is that one piston has a scratch in the top of the piston. should clean up with a fine roloc disc and I don't forsee it being an issue. I assume your not buying it for the Lifters but the one tray and some of the lifters are questionable. the ones on the other side are out. I would recomend replacing them. I will include a full spare set of nice used trays with lifters. They are the fully incapsulated ones like the GM #12499225 set


Several have inquired about shipping. There are a ton of company's near by that can pick it up. I don't know who to use for freight and I dont have time to run all over getting a weight and qoutes for every one.

If your intrested in having it shipped, I will put it on a pallet and YOU can arrange to have it picked up. ZIP code is 92802 I will give you the exact location once it's payed for. There is a fork lift on site so it can be loaded for the driver. Thats as far as I want to get into shipping.

Short block weighs approx. 350 LBS

I will cover it with plastic trash bags and spray it down With WD40. It will be attached to a pallet. There is forklift onsite. Just don't mention the word oil or they freak out like it's hazardous waste.... If your getting the block with crank I will put some used bearings in the block and install the crank so It's not lose and wrap it the same way.

ABF- There near by this location
Con Way -There near by this location
Fed Ex Freight -There RIGHT by this location
Old Dominion -Not so close
Oak Harbor Freight -Not so close
Saia Motor Freight -Some were near by
UPS Freight -There near by this location
Yellow Freight -There near by this location

You can also try sites like Freightquote.com, efreightsolutions.com

If You ASK For A Quote, I will NOT Respond

I will Gladly take paypal if you want to pay the fee...

 

Bump TTT

 

Am I still good on the one set of pistons?