4.030" Wiseco forged pistons, 7 Eagle H-beams 6.125"
04-30-2008, 02:03 PM
#1
TECH Fanatic
Thread Starter
iTrader: (65)
Join Date: Jun 2006
Location: Tyndall AFB / Panama City, FL
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
4.030" Wiseco forged pistons, 7 Eagle H-beams 6.125"
Wiseco forged nitrous pistons, part #K394A3, 8cc dish, include wrist pins and spirolocks. About 6k miles on them and NEVER sprayed nitrous $400 obo shipped
7 Eagle H-beam rods, 6.125", accept standard .927" wrist pin. Part#CRS6125B3D Include ARP rod bolts. There are only 7 because my motor hydrolocked and busted a rod. These have been checked by my machine shop and are good to go. I spoke to Eagle and all you have to do is call them with the weight of one rod and they will send you one the same weight, it will cost approx $70. Also about 6k miles on these. $300 shipped
7 Eagle H-beam rods, 6.125", accept standard .927" wrist pin. Part#CRS6125B3D Include ARP rod bolts. There are only 7 because my motor hydrolocked and busted a rod. These have been checked by my machine shop and are good to go. I spoke to Eagle and all you have to do is call them with the weight of one rod and they will send you one the same weight, it will cost approx $70. Also about 6k miles on these. $300 shipped
Thread
Thread Starter
Forum
Replies
Last Post
