2008 All Aluminum 6.2 Long Block (MA)
04-22-2011, 12:32 PM
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Dec 2010
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
2008 All Aluminum 6.2 Long Block (MA)
This motor is a 2008 Cadillac Escalade 6.2L L92 Long Block (this means that it includes heads and short-block, no intake, accessories and etc)
I purchased this as a low-mileage take-out from RAD Auto Machine in Ludlow Ma. The only reason I am selling this is because I am taking my project a different direction.
Short Block
Bone stock the way I purchased it. Still has the VVT installed, but can be swapped to a standard 3 bolt cam for very little money. Motor has 2008 truck pan still installed, as well as truck balancer. All cylinders are extremely cleaned and were properly oiled before being wrapped up and stored. About once a week I turn the motor over so the pistons dont sit in the same spot. Still can see the crosshatch perfectly. This is a MINT shortblock.
Cylinder Heads
Obviously the heads are L92 as well...however I did have RAD Auto Machine do a little work to them. Heads have been resurfaced, brand new LS6 yellow springs, exhaust side ported, and bowls blended. All of the work was professionally done at the machine shop and I have the paperwork to back it up. The heads are nothing insane, but they are ready to go and better then new.
Extras
Also included with the sale are a BRAND NEW set of ARP Pro Series head bolts. I have a full set of truck coils and brackets with stock wires which are also included. Finally, all the stock rockers, hardware and pushrods are packaged up and ready to roll.
__________________________________________________ ________
This motor is ready to go. Slap a set of new headgaskets on and GO! You will not find a better deal on an all aluminum 6.2. There are guys asking my price for complete ls1 motors still. Heads are obviously still off and motor is ready for inspection. Come see how clean it is for yourself and bring some cash
Located in Springfield MA
Price is 2100.00 FIRM as listed above.
I will NOT split up the motor.
I will NOT ship this engine.
Thanks
I purchased this as a low-mileage take-out from RAD Auto Machine in Ludlow Ma. The only reason I am selling this is because I am taking my project a different direction.
Short Block
Bone stock the way I purchased it. Still has the VVT installed, but can be swapped to a standard 3 bolt cam for very little money. Motor has 2008 truck pan still installed, as well as truck balancer. All cylinders are extremely cleaned and were properly oiled before being wrapped up and stored. About once a week I turn the motor over so the pistons dont sit in the same spot. Still can see the crosshatch perfectly. This is a MINT shortblock.
Cylinder Heads
Obviously the heads are L92 as well...however I did have RAD Auto Machine do a little work to them. Heads have been resurfaced, brand new LS6 yellow springs, exhaust side ported, and bowls blended. All of the work was professionally done at the machine shop and I have the paperwork to back it up. The heads are nothing insane, but they are ready to go and better then new.
Extras
Also included with the sale are a BRAND NEW set of ARP Pro Series head bolts. I have a full set of truck coils and brackets with stock wires which are also included. Finally, all the stock rockers, hardware and pushrods are packaged up and ready to roll.
__________________________________________________ ________This motor is ready to go. Slap a set of new headgaskets on and GO! You will not find a better deal on an all aluminum 6.2. There are guys asking my price for complete ls1 motors still. Heads are obviously still off and motor is ready for inspection. Come see how clean it is for yourself and bring some cash
Located in Springfield MA
Price is 2100.00 FIRM as listed above.
I will NOT split up the motor.
I will NOT ship this engine.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
04BlackGmc
GM Drivetrain & Suspension
2
07-16-2015 04:10 PM
