Starting my turbo build, so I am parting with my old setup. This motor has been great for me, had lots of awesome memories with it, never have had any issues. Bottom end has 108K miles on it, everything else 1-2K miles. Compression is around 11.3:1. With a FAST 92/92 on a speed density tune it made 468/418. Runs flawlessly, no issues whatsoever. Always changed oil every 3K miles. Never sprayed nitrous through it.

Longblock includes;

oil pan
timing chain
oil pump
water pump (new 2K miles)
valve covers
LS7 lifters (new 1K miles)
7.4 comp chromemoly pushrods (new 1K miles)
.01 flycut pistons on exhaust and intake
torquer v2 cam (232/234 .595/.598)
ported and milled 243s by Performance Machine in Hutto - flow similar to AFR 225s, 59cc combustion chambers (new 1K miles)
.051 GM MLS head gaskets (new 1K miles)
ARP head bolts (new 1K miles)
ASP 25% underdrive pulley - correct ac and main belt lines for it.
NGK TR6 plugs
MSD wires

All the work done to it was either done by me or Jon @ DB Rods and minis. No corners were cut with anything. I could also include a copy of the HPTuners file so you can tune it yourself, or have someone tune it for you...

I am asking $2600 for everything listed. Can meet up around the Austin area; dallas, san antonio, or houston if you pay for gas. Or you can pick it up at DB Rods & Minis in Taylor Tx.

Please save yourself the time if you either don't have the money, or are going to try to lowball me.

If you have any questions, or need any specific pictures of anything, please PM me, post here, or txt me at: 8 O 6 - 2 3 1 - 6 2 3 4



http://www.youtube.com/watch?v=Hhx03oKTbFQ

 

bump.