What Next?
Nov 21, 2006 | 05:00 PM
#12
i removed my built 60E from my truck. it has the following mods and then some
off top of my head it has the transgo vac mod, transgo HD shift kit with 2 shims and full race drilled VB along with race springs, also has deep B&M tranny pan, billet OD servo, billet 2-3 servo, 5 pinion planets, 6 clutch pak, HD clutches i forget what else
this trans has held up to my setup with a 3800 stall and shifting on average at 6700-6800. it shifts hard. ppl that known my setup knew it wasnt a slouch on power either[even with my fueling issues i just recently found]
currently the trans is going to the shop that built it. Hodges in PA. its going there to get freshend up some if needed. im either going to sell it or set it aside for my LSX stang project if i got thru with it
off top of my head it has the transgo vac mod, transgo HD shift kit with 2 shims and full race drilled VB along with race springs, also has deep B&M tranny pan, billet OD servo, billet 2-3 servo, 5 pinion planets, 6 clutch pak, HD clutches i forget what else
this trans has held up to my setup with a 3800 stall and shifting on average at 6700-6800. it shifts hard. ppl that known my setup knew it wasnt a slouch on power either[even with my fueling issues i just recently found]
currently the trans is going to the shop that built it. Hodges in PA. its going there to get freshend up some if needed. im either going to sell it or set it aside for my LSX stang project if i got thru with it