Well I finally did it
Sep 12, 2005 | 07:15 AM
#15
Thread Starter
12 Second Truck Club
iTrader: (5)
Joined: Apr 2005
Posts: 5,230
Likes: 5
From: Sittin on jackstands
Originally Posted by Ruffrider5.3
So what happened so I can put that at the top of my DO NOT DO list.
Im thinking its what I didnt do.....ARP rod bolts, but not real sure what happened
Sep 12, 2005 | 08:34 AM
#16
Originally Posted by white1
Im thinking its what I didnt do.....ARP rod bolts, but not real sure what happened
Something went terribly wrong! You arent spraying and arent sc/tc'd are you? I would sure the hell want to know what happened becuase that doesnt sound right! Sorry for the loss
and congrats on your 1st motor kill! At least one good thing will come out of this--you will be alot stronger than before! 
Sep 12, 2005 | 09:09 AM
#17
Thread Starter
12 Second Truck Club
iTrader: (5)
Joined: Apr 2005
Posts: 5,230
Likes: 5
From: Sittin on jackstands
Maybe a rod bolt?? 
The bad part is I think my wife is taking my tools except for my 15mm 9/16 and the oil filter wrench. Im still trying to figure out how to do teh cam swap in the 6.0 with a oil filter wrench and 15mm 
The bad part is I think my wife is taking my tools except for my 15mm 9/16 and the oil filter wrench. Im still trying to figure out how to do teh cam swap in the 6.0 with a oil filter wrench and 15mm
Sep 12, 2005 | 11:58 AM
#18
Originally Posted by white1
Mr yranny went out Fri night, a few hours I blew the motor. Ruined everything. Block oil pan, heads, cam, crank, pistons (2 are MIA, 1 cracked, and we wont talk about the other 5) At least 4 connecting rods dicenegrated, and I havent even tore it apart yet. Thats just from looking through the hole in the block.
I'll post pics just as soon as I find out how.
I'll post pics just as soon as I find out how.
That's sux. Good luck with the cam install with your nice assortment of tools. Should have hid your tools...
