PerformanceTrucks.net Forums

GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

Valve stem seal part number

Thread Tools
 
Search this Thread
 
Old Oct 1, 2016 | 08:51 PM
  #1  
Wolftrk99's Avatar
Wolftrk99
Thread Starter
TECH Senior Member
iTrader: (5)
 
Joined: Jun 2013
Posts: 5,492
Likes: 48
From: Virginia Beach,VA
Default Valve stem seal part number
Does anyone have the part number for valve stem seals for aftermarket spring seats? All the ones listed for the ls engines are the factory type...
Reply
0
Old Oct 2, 2016 | 02:18 AM
  #2  
Wolftrk99's Avatar
Wolftrk99
Thread Starter
TECH Senior Member
iTrader: (5)
 
Joined: Jun 2013
Posts: 5,492
Likes: 48
From: Virginia Beach,VA
Default
I think.....SS70945 (Felpro pn).... Will work, i will put my habds on then tomorrow and know for sure
Reply
0
Old Oct 2, 2016 | 10:18 PM
  #3  
Wolftrk99's Avatar
Wolftrk99
Thread Starter
TECH Senior Member
iTrader: (5)
 
Joined: Jun 2013
Posts: 5,492
Likes: 48
From: Virginia Beach,VA
Default
Anybody? Helping a buddy go through my old 5.3 to swap into his bmw....and i seem to have lost the one i need for my 99....
Reply
0
Old Oct 2, 2016 | 10:43 PM
  #4  
slvrram's Avatar
slvrram
On The Tree
 
Joined: Sep 2005
Posts: 154
Likes: 3
From: Houston
Default
12457652/12533586 are what I used with the last set of BTR springs I installed. I tried to cross the pn to Fel-Pro to no avail. They look the same fwiw.
Reply
0
Old Oct 2, 2016 | 11:00 PM
  #5  
Wolftrk99's Avatar
Wolftrk99
Thread Starter
TECH Senior Member
iTrader: (5)
 
Joined: Jun 2013
Posts: 5,492
Likes: 48
From: Virginia Beach,VA
Default
thanks i will see if parts can get me some tomorrow...
Reply
0
Old Oct 2, 2016 | 11:04 PM
  #6  
Wolftrk99's Avatar
Wolftrk99
Thread Starter
TECH Senior Member
iTrader: (5)
 
Joined: Jun 2013
Posts: 5,492
Likes: 48
From: Virginia Beach,VA
Default
Now that i think about it i need to dig in my spare larts drawer of my toolbox.... I may have some!!!
Reply
0
Old Oct 2, 2016 | 11:07 PM
  #7  
slvrram's Avatar
slvrram
On The Tree
 
Joined: Sep 2005
Posts: 154
Likes: 3
From: Houston
Default
Excellent. Love when I'm able to use parts that I saved from other projects.
Reply
0

Trending Topics

Old Oct 2, 2016 | 11:13 PM
  #8  
Wolftrk99's Avatar
Wolftrk99
Thread Starter
TECH Senior Member
iTrader: (5)
 
Joined: Jun 2013
Posts: 5,492
Likes: 48
From: Virginia Beach,VA
Default
Hell most of the time when i do head gaskets we sent the heads out the machine shop sends the valve stem seals back and uses there own... So i have a bunch of extras!!!
Reply
0
Old Oct 3, 2016 | 02:12 PM
  #9  
Wolftrk99's Avatar
Wolftrk99
Thread Starter
TECH Senior Member
iTrader: (5)
 
Joined: Jun 2013
Posts: 5,492
Likes: 48
From: Virginia Beach,VA
Default
Ordered a set this morning.... Dont have any in the toolbox
Reply
0
Old Oct 3, 2016 | 08:28 PM
  #10  
slvrram's Avatar
slvrram
On The Tree
 
Joined: Sep 2005
Posts: 154
Likes: 3
From: Houston
Default
Originally Posted by Wolftrk99
Ordered a set this morning.... Dont have any in the toolbox
Fail! Looked for this thread to ask you how the install went. Looks like you're in the same boat as me.. waiting on parts.
Reply
0



Advanced Search

All times are GMT -5. The time now is 10:56 PM.