Here's the procedure:


1.Insert key, attempt to start the vehicle and leave the key in the ON position.
In some vehicles, the Battery and Security light will blink for several seconds, and then shut off. Then the Security light will then remain ON. Leave the ignition ON until the Security light goes OFF. This will take more than 5 mins.

2.When the Security light goes OFF, turn the ignition to the OFF position.
Leave ignition OFF for 20 Seconds.

3.Attempt to start the vehicle again and leave the key in the ON position.
In some vehicles, the Battery and Security light will blink for several seconds, and then shut off. Then the Security light will then remain ON. Leave the ignition ON until the Security light goes OFF. This will take more than 5 mins.

4.Turn the ignition to the OFF position for 20 Seconds.

5.Attempt to start the vehicle again and leave the key in the ON position.
In some vehicles, the Battery and Security light will blink for several seconds, and then shut off. Then the Security light will then remain ON. Leave the ignition ON until the Security light goes OFF. This will take more than 5 mins.

6.Once this entire procedure has been completed (three times) your vehicle will start on the fourth attempt.

 

i have an 86 chevy i dont have any security lights ...... tried it anyways to leave the key on for 15 ... no good im getting a friend to come over sunday with hpt ... i bought 2credits from him ...... we will see what we come up with

any hints on removing vats, is it just a on off setting?


thanks though .... engine swaps are fun until this stuff happens....

 

Actually no... thats the problem.. LOL