tbss intake and 243's installed
Nov 18, 2008 | 05:33 AM
#22
i used the dr.x harness (torquerushdotcom) with a stock tbss 90mm throttle body that came with the manifold. I also used the tbss fuel rails with my 8.1 injectors. i got rid of the evap crap, and plugged the passenger side vent line on the valve cover. thats pretty much all to it
Nov 20, 2008 | 06:34 PM
#24
Thread Starter
12 Second Club
iTrader: (46)
Joined: Feb 2003
Posts: 841
Likes: 0
From: Virginia Beach, VA
I went to the track last night and ran a best of 12.7@105. my best time so far, before the stock 243's and tbss manifold i ran a best of 13.1@103. there was a 15 degree difference in temp at the track that really helped
Nov 20, 2008 | 06:50 PM
#26
thats a pretty good increase man. wonder how much of it was from the increased compression of the heads? do you know what your cr is now?
Nov 20, 2008 | 07:23 PM
#28
Thread Starter
12 Second Club
iTrader: (46)
Joined: Feb 2003
Posts: 841
Likes: 0
From: Virginia Beach, VA
thanks guys! the run was full weight, system, spare, 1/2 tank, with street tires. i know the temp decrease helped along with the higher cr. im sure the intake/tb helped some. my cr is around ~10.2 . the stock 243's bumped me up almost 1 point in compression
