PerformanceTrucks.net Forums
Page 2 of 5
1
2
3
4
Last »
Show 40 post(s) from this thread on one page

PerformanceTrucks.net Forums (https://www.performancetrucks.net/forums/)
-   GM Engine & Exhaust Performance (https://www.performancetrucks.net/forums/gm-engine-exhaust-performance-21/)
-   -   tbss intake and 243's installed (https://www.performancetrucks.net/forums/gm-engine-exhaust-performance-21/tbss-intake-243s-installed-428877/)

andrew383 11-15-2008 05:33 PM
Originally Posted by BigCountryx (Post 4051929)
Never heard about this, I ran an x-link on my "car" 90mm without any noticeable problems, you have a link with more details?
the air flow is different and causes an idle and shifting problem,now for the maggie guys its a different story :devil:
http://www.tbssowners.com/forums/showthread.php?t=4799

andrew383 11-15-2008 06:04 PM
hey MGMC you should have bought this one :devil:
http://www.tbssowners.com/forums/showthread.php?t=6018

MGMC 11-15-2008 11:53 PM
Originally Posted by andrew383 (Post 4052230)
hey MGMC you should have bought this one :devil:
http://www.tbssowners.com/forums/showthread.php?t=6018
damn, thats a bad b*tch right there :devil:

Low_LSX 11-16-2008 06:18 PM
Originally Posted by dlt76028 (Post 4051886)
who makes a 90mm dbc throttle body for the tbss conversion?
For 99-02 trucks you can run a 90mm UMI T/B Chris thunder550 Had one.

1bigcam 11-17-2008 03:18 PM
will the trailblazer ss tb plug in to a 03 silverado or how do i get it to work ??

skyhighsami 11-17-2008 04:10 PM
I was wondering the same thing about what TB to use. I think people are having to get a Dr X harness and run a Corvette throttle body or something like that. I wanted to make sure about this as I am starting to horde parts for my truck and Camaro build

Truckshop 11-17-2008 06:36 PM
Originally Posted by 1bigcam (Post 4053868)
will the trailblazer ss tb plug in to a 03 silverado or how do i get it to work ??
Originally Posted by skyhighsami (Post 4053931)
I was wondering the same thing about what TB to use. I think people are having to get a Dr X harness and run a Corvette throttle body or something like that. I wanted to make sure about this as I am starting to horde parts for my truck and Camaro build
you need the torquerush harness for either t-body to work.

MGMC 11-17-2008 06:59 PM
Originally Posted by skyhighsami (Post 4053931)
I was wondering the same thing about what TB to use. I think people are having to get a Dr X harness and run a Corvette throttle body or something like that. I wanted to make sure about this as I am starting to horde parts for my truck and Camaro build
i used the dr.x harness (torquerushdotcom) with a stock tbss 90mm throttle body that came with the manifold. I also used the tbss fuel rails with my 8.1 injectors. i got rid of the evap crap, and plugged the passenger side vent line on the valve cover. thats pretty much all to it

Truckshop 11-17-2008 07:09 PM
Originally Posted by MGMC (Post 4054143)
i used the dr.x harness (torquerushdotcom) with a stock tbss 90mm throttle body that came with the manifold. I also used the tbss fuel rails with my 8.1 injectors. i got rid of the evap crap, and plugged the passenger side vent line on the valve cover. thats pretty much all to it
did you disconnect your pcv?

skyhighsami 11-17-2008 08:13 PM
How does this intake compair to a L92? I have been reading on that intake and those heads and they seem pretty good. Since I am in the air about what heads I will run I am up in the air also about intake. Thanks


All times are GMT -5. The time now is 10:15 AM.
Page 2 of 5
1
2
3
4
Last »
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands