PerformanceTrucks.net Forums

PerformanceTrucks.net Forums (https://www.performancetrucks.net/forums/)
-   GM Engine & Exhaust Performance (https://www.performancetrucks.net/forums/gm-engine-exhaust-performance-21/)
-   -   Supercharge 6.0L?? (https://www.performancetrucks.net/forums/gm-engine-exhaust-performance-21/supercharge-6-0l-33788/)

L82gofast 06-25-2002 12:06 AM

Supercharge 6.0L??
 
Hey guys, I picked up a new C1500HD and have been looking at superchargers for it. Magnacharger has, what looks like, the simplest and most straightforward install. I know that it won't give quite as much as a whipple but I just want to embarrass the dime store rustangs like I did with my cam'ed '98. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Anyone have any experiance with these blowers that can offer some advice?

hyde 06-25-2002 12:09 AM

Re: Supercharge 6.0L??
 
www.superchargeronline.com
________
Portable Vaporizers Reviews

L82gofast 06-25-2002 07:42 AM

Re: Supercharge 6.0L??
 
Thanks Hyde, I have been all over that site. Its real good info. I was just wondering if anybody out there could relay any experiance with the magnacharger setup on a 4.8,5.3 or 6.0

hyde 06-25-2002 08:33 AM

Re: Supercharge 6.0L??
 
A buddy of mine has a 4.8 with a whipple and cam and it made 440hp at the wheels and right at 480ftlbs. I would go whipple before i went magna.
________
Honda specifications

Neil 6.0 06-25-2002 08:37 AM

Re: Supercharge 6.0L??
 
The only person that I know of who put a Magnuson on a 6.0 is Tom Byrne (TByrne Motorsports). On his website it says he put down 357hp/422tq with the usual bolt-ons.

A while back I think there was an Escalade that was making the rounds with all the popular truck magazines, I think it had a Magnuson on it too.

hyde 06-25-2002 08:48 AM

Re: Supercharge 6.0L??
 
I say get the bottle... My truck on Sat. made 430hp and 538ftlbs at the wheel at the MTI Dyno Day. Its only a 5.3, with Hpp, Flowmasters, K&N FIPK

<small>[ June 25, 2002, 08:49 AM: Message edited by: hyde ]</small>
________
I-inhale

parish8 06-25-2002 04:21 PM

Re: Supercharge 6.0L??
 
"A buddy of mine has a 4.8 with a whipple and cam and it made 440hp at the wheels and right at 480ftlbs. I would go whipple before i went magna."

i would like to hear more about this set up.

hyde 06-25-2002 05:50 PM

Re: Supercharge 6.0L??
 
This computer is really slow, I'll respond to it tommorow.
________
perfect tits Webcam

hyde 06-25-2002 07:53 PM

Re: Supercharge 6.0L??
 
Parish 8 running 3 psi is useless. You are adding adding fifty horse power and its taking 10 to spin the blower for a grand total of 40hp... <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> Dude slam the boost to that mutha.. You got it use it...Run 10 or 12 psi let it rip, just watch when you are tunning that thing. Don't be scared.... <img border="0" alt="[guns]" title="" src="graemlins/gr_guns.gif" />
________
Hiv / Aids Forums

Maxmumboom 06-26-2002 12:04 AM

Re: Supercharge 6.0L??
 
I run a magna charger on my 5.3. I really liked it, but it doesnt make the power of a whipple, nor the bottle. as for the install, and things fitting properly. I would go with Magnacharger. I ddid the install in 4 hours w/2 friends and 2 cases of ice cold silver bullets. The reason why i got the magna charger, is its design. it also has very little parasitic drag when you are driving at a humane rate. The cool thing is that it is always blowing of the boost, unless you get on it, then it builds psi, which = better fuell economy. If your looking for 1/4 mile #'s get it on the bottle. if you have cash then blow it and juice it. youll put down some nice #s then. Just be ready for a trans rebuild in a few thousand miles.


All times are GMT -5. The time now is 06:22 PM.


© 2024 MH Sub I, LLC dba Internet Brands