Speed Engineering Twin Turbo Kits!!
#61
Launching!
iTrader: (8)
Join Date: Sep 2005
Location: Tampa, Fl
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Do you have any pictures of this kit mocked up on an engine out of a truck? Just curious to see how it all goes together and routing... might work for me on another application as well
#68
We have been on them constantly lately. The problem is we have 3-4 kits in production at the moment, and we are in the middle of switching intercooler/cold side factory's. We thought the delay was only going to be a month or so, but little things keep popping up. I apologize for the delay. Once we get everything in stock for the first time production should be much smoother from here on out. The current eta we have on everything is the end of March.
Thanks
Sean
Thanks
Sean
The following users liked this post:
LOWRIDERGMC (02-12-2018)
#70
Yes, they have a 60mm Inducer, and 55mm Turbine. No need to go any smaller we can cruise down the freeway in overdrive start to give it gas, and you can here the turbos start to spool around 2300rpm. This kit has been on several trucks making as low as 440rwhp on a stock motor, and upwards of 800rwhp so far on a 6.0L. We will also offer an optional A/R change on the exhaust housing for guys under or over 600rwhp. There is a recent dyno video on our Instagram account doing a 750rwhp pull on 16lbs if you want to checkout the latest info.
Thanks
Sean
Thanks
Sean