Should a new motor run hot?
#28
Thread Starter
High on diesel fumes
iTrader: (70)
Joined: Mar 2005
Posts: 12,658
Likes: 3
From: Phoenix, AZ
Originally Posted by TurboBerserker
Thunder, the first thing I did after installing my 408 was fishtail... both the front and the rear at the same time


Tune still needs lots of work. It's real lean down low, don't get much power until I hit about 3500 RPM. I'm also running 18* timing max, still set there from the Radix tune. I took some videos. I'll have them posted in a few minutes.
Oh, 96# injectors = 35% IDC at 6200 RPM WOT hahahahahahaha!!!!!!
#29
Originally Posted by thunder550
Hahah well I've had her up to about 120 now WOT from a standing start. So much for "break-in"
Tune still needs lots of work. It's real lean down low, don't get much power until I hit about 3500 RPM. I'm also running 18* timing max, still set there from the Radix tune. I took some videos. I'll have them posted in a few minutes.
Oh, 96# injectors = 35% IDC at 6200 RPM WOT hahahahahahaha!!!!!!
Tune still needs lots of work. It's real lean down low, don't get much power until I hit about 3500 RPM. I'm also running 18* timing max, still set there from the Radix tune. I took some videos. I'll have them posted in a few minutes.
Oh, 96# injectors = 35% IDC at 6200 RPM WOT hahahahahahaha!!!!!!
! You need som BOOST! 
So how does it fell compared to the radix 6L even thought the tune sucks?
#30
Thread Starter
High on diesel fumes
iTrader: (70)
Joined: Mar 2005
Posts: 12,658
Likes: 3
From: Phoenix, AZ
It feels good but not great right now, but I think it's going to be very comparable once I get the tuning straightened out. As good, if not better.
Here's the video links. Stupid optimizing.....hopefully it won't take long
Start-up & idle vid
Part throttle run
Part of a WOT run
Here's the video links. Stupid optimizing.....hopefully it won't take long
Start-up & idle vid
Part throttle run
Part of a WOT run


