GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

Question guys

Old Jan 20, 2004 | 11:42 PM
  #1  
Wheatley's Avatar
Thread Starter
Truck Sponsor
iTrader: (12)
 
Joined: Apr 2003
Posts: 3,286
Likes: 2
From: Sealy/Katy TX
Default Question guys

My truck just ran a 15.47 at 89 MPH in the 1/4 tonight with wheel spin ,do yall think this is a good time?My truck is listed in my sig below.I finally got the nerve to run in the 1/4 with my new gtech.What do yall think?
Reply
Old Jan 21, 2004 | 10:54 AM
  #2  
Pro Stock John's Avatar
Registered User
iTrader: (34)
 
Joined: Nov 2001
Posts: 41,598
Likes: 0
From: Chicago, IL
Default

15.4@87 G-Tech or track?

If that is track I am a bit underwhelmed, I'd hope you would run high 14's at least.

I went 16.3@84mph with my Tahoe when it was stock and with 3.08 gears, I'd say I could run at least mid 15's now and I did my Yank converter I'd be shooting for a 14.9.
Reply
Old Jan 21, 2004 | 11:09 AM
  #3  
TheOtherDodge's Avatar
Staging Lane
 
Joined: Jan 2004
Posts: 76
Likes: 0
From: Houston, Tx
Default

Ya, is it track or G-tech? If G-tech, disregard it. If track, your mph is high for a mid 15 so your 60ft's must have sucked. 89 mph should get you high 14's if you can get it to hook.
Reply
Old Jan 21, 2004 | 11:38 AM
  #4  
TECH Junkie
 
Joined: Mar 2002
Posts: 3,019
Likes: 1
From: memphis tn
Default

When my Tahoe was stock it turned 15.99 at about 87mph.
Reply
Old Jan 21, 2004 | 02:50 PM
  #5  
KeukaZ71's Avatar
TECH Addict
 
Joined: Jan 2003
Posts: 2,002
Likes: 0
From: New York
Default

without the wheel spin, i think you should be low 15's

i think that sounds about right with wheel spin.
Reply
Old Jan 21, 2004 | 04:02 PM
  #6  
Wheatley's Avatar
Thread Starter
Truck Sponsor
iTrader: (12)
 
Joined: Apr 2003
Posts: 3,286
Likes: 2
From: Sealy/Katy TX
Default

Well guys I finally got a great run in without wheels pin and a nice launch.It ran a 15.07 at 91MPH,I kind of thought the MPH was kind of high though.It ran the 1/8 in 9.64SEC at 75MPH and my 60 FT was 2.31.0-60MPH was 6.7.I dont know how it pulled these numbers but I did it again and got very similar results.
Reply
Old Jan 21, 2004 | 06:45 PM
  #7  
Pro Stock John's Avatar
Registered User
iTrader: (34)
 
Joined: Nov 2001
Posts: 41,598
Likes: 0
From: Chicago, IL
Default

Is that G-Tech or the track?

15.0@91mph is decent, if you could 60ft better you'd run 14.5 I think.
Reply
Old Jan 21, 2004 | 07:15 PM
  #8  
Wheatley's Avatar
Thread Starter
Truck Sponsor
iTrader: (12)
 
Joined: Apr 2003
Posts: 3,286
Likes: 2
From: Sealy/Katy TX
Default

acually that is gtech.I cant get any lower than a 2.30 60FT.Plus I am not sure on what to set the rollout at.What do you think I should set it at?I also do not know what the track rollout is set at.
Reply
Old Jan 21, 2004 | 07:20 PM
  #9  
TECH Junkie
 
Joined: Mar 2002
Posts: 3,019
Likes: 1
From: memphis tn
Default

What tires are you running?Are you getting wheelhop or just wheelspin?
Reply
Old Jan 21, 2004 | 07:28 PM
  #10  
Deckhand's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Apr 2003
Posts: 1,887
Likes: 1
From: Corpus Christi, TX
Default

I ran a 15.4250 at 91.20MPH

how's that?

what do i need to improve? is this normal for my mods?

this is at San Antonio Raceway
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:56 AM.