Project Began
12-08-2004, 07:00 PM
#76
TECH Veteran
iTrader: (6)
Join Date: Nov 2003
Location: Tallahassee, FL
Posts: 4,397
Likes: 0
Received 0 Likes
on
0 Posts
Not gonna try what GMC SKI did?
The 4 link kit was designed to be used with air bags so the panhard bar sat to far forward not allowing us to get a coilover in
So we ended up redoing the angle on the panhard bar
We had to push the bar further back towards the rear thus the trainbulated bracket we made out of some thick wall tubing
So we ended up redoing the angle on the panhard bar
We had to push the bar further back towards the rear thus the trainbulated bracket we made out of some thick wall tubing
12-12-2004, 09:29 PM
#79
So we didnt touch the truck since we did the 4-link. This week I am going to try and get the fuel system done and the fast wired up, and fab up the tranny crossmember. Hopefully I can get those things done this week. I go out of town all weekend and next week, so when I get back all i want to have to do is weld up the intercooler piping, and fix the panhard bar. Then let the tuning begin. Just thought I would keep yall updated, sorry nothing good this time.