Hey dude!

Wheeler messed up on my compression and installed the bigger 31cc SRP pistons so I sent them my heads to have them machined to get the compression back to the 9.0 to 1 that I wanted...they are going to do a CC of all the chambers on the house as well as recheck everything...I already gave them the deck height of all the cylinders as I do have the short block at home now <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Was doing some dyno2000 sim runs and it looks like it will be putting out pretty close to what I was running with the old 350 engine with 8psi of boost when I was running water injection...except that engine did have more lower end HP/TQ but at 4,000rpms it was pretty close...

Remember my best run was 14.1@95.5mph (4HI launch) with the old 350 engine at 8psi with water/alk injection....never got to run it with the 7.3L turbo diesel intercooler installed <img border="0" title="" alt="[Frown]" src="gr_sad.gif" /> I figure with 10 psi of boost and with the MF2 Aux injector controller and two extra 95lb injectors it should have another 150+HP and about 200lbs more torque once I get it dialed in...would be nice to get into the high 12's <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Ken
Moreno Valley, CA
http://www.kctrading.net/sierra/
<img src="http://james.jaguar.net/kctrading/Pics-of-truck-3-2-02/K1500.jpg" alt=" - " />

 

I thought Richard (Oxidizr) was a monitor here???

<img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Ken

 

oxiclean hasn't been around for awhile he is probaly working or something but that sounds like a nice setup i'd like to see a video of the run and keeps us updated i know the is for more ls1 motor guys but keeps us updated i'm interested

marc