GMCtrk

iTrader: (27)

I'll say this, once you get these two headers in your hand you'll know which one you're holding is the budget header. The coating on the Pacesetters looks fragile at best. There's a couple spots where the coating already rubbed off during shipping. And the welds look like a disaster compared to the OBX. But the performance, that's the question. Check out the collector on the Paces versus the OBX. That's what I'm interested in. Oh, and hopefully these dont bang on my frame. I'll have the paces in on Sunday. To summarize, the OBX you get a $1200 header for $500, the Paces you get a $500 header for $500.

buzzkillwill

iTrader: (5)

(noob Q ) which one is which...??

RandomHero

iTrader: (24)

Yea, but what's the point if you can't fit the OBX in your truck.

GMCtrk

iTrader: (27)

I think it's more an early NBS thing. Nearly every case of hitting the frame I came across was early NBS. Haven't heard of an 03+ having any probs.

fastgmc53

iTrader: (33)

obx on top Pacesetter on bottom.......

D_reks{5.3}

iTrader: (13)

OBX is the top and pacesetter is the bottom.

skyhighsami

iTrader: (8)

Doesn't the OBX have a 2.5" collector and the Pacesetters have a 3"

hirdlej

iTrader: (31)

You're not going to be able to tell the difference in performance Should have kept the OBX's

RandomHero

iTrader: (24)

They didn't fit, hence my first post.

03sierraslt

iTrader: (22)

My OBXs are working good. I have had them for almost 2yrs now.