need stock 6.0 edit file, and 43 pound injector edit info.
06-25-2004, 11:51 AM
#1
TECH Resident
Thread Starter
Join Date: Apr 2003
Location: Lone Star, Tx
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
need stock 6.0 edit file, and 43 pound injector edit info.
i need a stock 6.0 file, and i now am running the 8.1 marine injectors. i need the correct edit values for that too. thanks.
06-25-2004, 05:31 PM
#3
TECH Apprentice
Join Date: Dec 2003
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
i can send you a file for an '02 1500hd, lq4 6.0 w/ 4l80e. actually was going to send it but could'nt figure out how to attach it to the ls1tech e-mail. if you want it ,tell me how or give me your address. e p.s if your going to ditch the electronics you're going to need to do alot of tuning.
06-25-2004, 05:51 PM
#4
TECH Resident
Thread Starter
Join Date: Apr 2003
Location: Lone Star, Tx
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
my plan is to ditch the electronics. my email is bigguy6f3@hotmail.com. also if you can, send it to bigguy75inches@icqmail.com. if the file is less than a meg, i know the icqmail one will handle it. im not sure how much the hotmail one can handle. thanks for your help so far guys! I got my motor in today from delevery! so im starting the swap tonight!
Trending Topics
06-25-2004, 11:30 PM
#8
segment 1 ID won't be the same on a different model truck. You won't find a 1/2 ton with the same segment ID as a 3/4 ton truck.
Flyer - am I the 'someone'? If so, I didn't know I was supposed to send you anything. Sorry. Here is an 03 6L 2wd 4L80 LS1 file I pulled out of an extra PCM I had: http://z71.net/036L4L80.LS1
Flyer - am I the 'someone'? If so, I didn't know I was supposed to send you anything. Sorry. Here is an 03 6L 2wd 4L80 LS1 file I pulled out of an extra PCM I had: http://z71.net/036L4L80.LS1
06-26-2004, 12:19 AM
#9
TECH Senior Member
iTrader: (1)
Join Date: Jan 2003
Location: Armpit of East TX
Posts: 9,342
Likes: 0
Received 0 Likes
on
0 Posts
Actually ... no, you weren't the 'someone' I was talking about. That someone knows though. 
I've kinda been waitin on it for a couple weeks.
I was told that if you can find a file with the same segment 1 ID, it will work. This is what Allen Nelson and John @ Speartech told me. I was led to believe that the segment 1 ID might be the same in different models, but I was under the same assumption as you before talking to them.
I've kinda been waitin on it for a couple weeks. I was told that if you can find a file with the same segment 1 ID, it will work. This is what Allen Nelson and John @ Speartech told me. I was led to believe that the segment 1 ID might be the same in different models, but I was under the same assumption as you before talking to them.